ajit/ch592-projects
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
ch592-projects/vendor/StdPeriphDriver/inc/CH592SFR.h
Ajit Ananthadevan 3f016f84d8 first commit
2025-08-17 12:42:01 +10:00

1870 lines
118 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Define for CH592 */
/* Website: http://wch.cn */
/* Email: tech@wch.cn */
/* Author: W.ch 2023.02 */
/* V0.2 SpecialFunctionRegister */
// multi-blocks: __BASE_TYPE__, __CH592SFR_H__, __CH592USBSFR_H__, __USB_TYPE__...
#ifndef __BASE_TYPE__
#define __BASE_TYPE__
#ifdef __cplusplus
extern "C" {
#endif
/* ********************************************************************************************************************* */
/* Base types & constants */
#ifndef TRUE
#define TRUE 1
#define FALSE 0
#endif
#ifndef NULL
#define NULL 0
#endif
#ifndef VOID
#define VOID void
#endif
#ifndef CONST
#define CONST const
#endif
#ifndef BOOL
typedef unsigned char BOOL;
#endif
#ifndef BOOLEAN
typedef unsigned char BOOLEAN;
#endif
#ifndef CHAR
typedef char CHAR;
#endif
#ifndef INT8
typedef char INT8;
#endif
#ifndef INT16
typedef short INT16;
#endif
#ifndef INT32
typedef long INT32;
#endif
#ifndef UINT8
typedef unsigned char UINT8;
#endif
#ifndef UINT16
typedef unsigned short UINT16;
#endif
#ifndef UINT32
typedef unsigned long UINT32;
#endif
#ifndef UINT64
typedef unsigned long long UINT64;
#endif
#ifndef UINT8V
typedef unsigned char volatile UINT8V;
#endif
#ifndef UINT16V
typedef unsigned short volatile UINT16V;
#endif
#ifndef UINT32V
typedef unsigned long volatile UINT32V;
#endif
#ifndef UINT64V
typedef unsigned long long volatile UINT64V;
#endif
#ifndef PVOID
typedef void *PVOID;
#endif
#ifndef PCHAR
typedef char *PCHAR;
#endif
#ifndef PCHAR
typedef const char *PCCHAR;
#endif
#ifndef PINT8
typedef char *PINT8;
#endif
#ifndef PINT16
typedef short *PINT16;
#endif
#ifndef PINT32
typedef long *PINT32;
#endif
#ifndef PUINT8
typedef unsigned char *PUINT8;
#endif
#ifndef PUINT16
typedef unsigned short *PUINT16;
#endif
#ifndef PUINT32
typedef unsigned long *PUINT32;
#endif
#ifndef PUINT8V
typedef volatile unsigned char *PUINT8V;
#endif
#ifndef PUINT16V
typedef volatile unsigned short *PUINT16V;
#endif
#ifndef PUINT32V
typedef volatile unsigned long *PUINT32V;
#endif
#ifndef PUINT64V
typedef volatile unsigned long long *PUINT64V;
#endif
/* ********************************************************************************************************************* */
/* Base macros */
#ifndef min
#define min(a,b) (((a) < (b)) ? (a) : (b))
#endif
#ifndef max
#define max(a,b) (((a) > (b)) ? (a) : (b))
#endif
#ifdef DEBUG
#define PRINT(X...) printf(X)
#else
#define PRINT(X...)
#endif
/* Calculate the byte offset of a field in a structure of type */
#define FIELD_OFFSET(Type, Field) ((UINT16)&(((Type *)0)->Field))
/* Calculate the size of a field in a structure of type */
#define FIELD_SIZE(Type, Field) (sizeof(((Type *)0)->Field))
/* An expression that yields the type of a field in a struct */
#define FIELD_TYPE(Type, Field) (((Type *)0)->Field)
/* Return the number of elements in a statically sized array */
#define NUMBER_OF(Array) (sizeof(Array)/sizeof((Array)[0]))
#define NUMBER_OF_FIELD(Type, Field) (NUMBER_OF(FIELD_TYPE(Type, Field)))
#ifdef __cplusplus
}
#endif
#endif // __BASE_TYPE__
#ifndef __CH592SFR_H__
#define __CH592SFR_H__
#ifdef __cplusplus
extern "C" {
#endif
/* ********************************************************************************************************************* */
// Address Space
// CODE: 00000000H - 0007FFFFH 512K
// DATA: 20000000H - 20007FFFH 32KB
// SFR: 40000000H - 4000FFFFH 64KB
//
// SFR: 40000000H - 4000FFFFH, 64KB
// SYS: +1000H - 1BFFH, include base configuration, interrupt, GPIO, etc...
// TMR0: +2000H - 23FFH
// TMR1: +2400H - 27FFH
// TMR2: +2800H - 2BFFH
// TMR3: +2C00H - 2FFFH
// UART0: +3000H - 33FFH
// UART1: +3400H - 37FFH
// UART2: +3800H - 3BFFH
// UART3: +3C00H - 3FFFH
// SPI0: +4000H - 43FFH
// I2C: +4800H - 4BFFH
// PWMx: +5000H - 53FFH
// LCD: +6000H - 63FFH
// USB: +8000H - 83FFH
// BLE: +C000H - D3FFH
// Register Bit Attribute / Bit Access Type
// RF: Read only for Fixed value
// RO: Read Only (internal change)
// RZ: Read only with auto clear Zero
// WO: Write Only (read zero or different)
// WA: Write only under safe Accessing mode (read zero or different)
// WZ: Write only with auto clear Zero
// RW: Read / Write
// RWA: Read / Write under safe Accessing mode
// RW1: Read / Write 1 to Clear
/* Register name rule:
R32_* for 32 bits register (UINT32,ULONG)
R16_* for 16 bits register (UINT16,USHORT)
R8_* for 8 bits register (UINT8,UCHAR)
RB_* for bit or bit mask of 8 bit register
BA_* for base address point
b* for GPIO bit mask
Others for register address offset */
/* ********************************************************************************************************************* */
/* Independent watch-dog register */
#define R32_IWDG_KR (*((PUINT32V)0x40001000)) // WO, watch-dog key register, must enable LSI
#define R32_IWDG_CFG (*((PUINT32V)0x40001004)) // RW, watch-dog configuration
#define RB_RLR 0x0FFF // RW, watch-dog counter reload (write protect)
#define RB_PR 0x7000 // PR, prescale (write protect)
#define RB_PVU 0x8000 // RO, register update flag (write protect)
#define RB_COUNT 0xFF0000 // RO, watch-dog down counter
#define RB_STOP_EN 0x20000000 // RW, watch-dog stop enable (write protect)
#define RB_WR_PROTECT 0x40000000 // RO, write protect
#define RB_IWDG_EN 0x80000000 // RO, watch-dog enable
/* System: safe accessing register */
#define R32_SAFE_ACCESS (*((PUINT32V)0x40001040)) // RW, safe accessing
#define R8_SAFE_ACCESS_SIG (*((PUINT8V)0x40001040)) // WO, safe accessing sign register, must write SAFE_ACCESS_SIG1 then SAFE_ACCESS_SIG2 to enter safe accessing mode
#define RB_SAFE_ACC_MODE 0x03 // RO, current safe accessing mode: 11=safe/unlocked (SAM), other=locked (00..01..10..11)
#define RB_SAFE_ACC_ACT 0x08 // RO, indicate safe accessing status now: 0=locked, read only, 1=safe/unlocked (SAM), write enabled
#define RB_SAFE_ACC_TIMER 0x70 // RO, safe accessing timer bit mask (16*clock number)
#define SAFE_ACCESS_SIG1 0x57 // WO: safe accessing sign value step 1
#define SAFE_ACCESS_SIG2 0xA8 // WO: safe accessing sign value step 2
#define SAFE_ACCESS_SIG0 0x00 // WO: safe accessing sign value for disable
#define R8_CHIP_ID (*((PUINT8V)0x40001041)) // RF, chip ID register, always is ID_CH58*
#define R8_SAFE_ACCESS_ID (*((PUINT8V)0x40001042)) // RF, safe accessing ID register, always 0x0C
#define R8_WDOG_COUNT (*((PUINT8V)0x40001043)) // RW, watch-dog count, count by clock frequency Fsys/131072
/* System: global configuration register */
#define R32_GLOBAL_CONFIG (*((PUINT32V)0x40001044)) // RW, global configuration
#define R8_RESET_STATUS (*((PUINT8V)0x40001044)) // RO, reset status
#define RB_RESET_FLAG 0x07 // RO: recent reset flag
#define RST_FLAG_SW 0x00
#define RST_FLAG_RPOR 0x01
#define RST_FLAG_WTR 0x02
#define RST_FLAG_MR 0x03
//#define RST_FLAG_GPWSM 0x04 // RO, power on reset flag during sleep/shutdown: 0=no power on reset during sleep/shutdown, 1=power on reset occurred during sleep/shutdown
#define RST_FLAG_GPWSM 0x05
// RB_RESET_FLAG: recent reset flag
// 000 - SR, software reset, by RB_SOFTWARE_RESET=1 @RB_WDOG_RST_EN=0
// 001 - RPOR, real power on reset
// 010 - WTR, watch-dog timer-out reset
// 011 - MR, external manual reset by RST pin input low
// 101 - GRWSM, global reset by waking under shutdown mode
// 1?? - LRW, power on reset occurred during sleep
#define R8_GLOB_ROM_CFG R8_RESET_STATUS // RWA, flash ROM configuration, SAM
#define RB_ROM_CODE_OFS 0x10 // RWA, code offset address selection in Flash ROM: 0=start address 0x000000, 1=start address 0x040000
#define RB_ROM_CTRL_EN 0x20 // RWA, enable flash ROM control interface enable: 0=disable access, 1=enable access control register
#define RB_ROM_DATA_WE 0x40 // RWA, enable flash ROM data & code area being erase/write: 0=all writing protect, 1=enable data area program and erase
#define RB_ROM_CODE_WE 0x80 // RWA, enable flash ROM code area being erase/write: 0=code writing protect, 1=enable code area program and erase
#define R8_GLOB_CFG_INFO (*((PUINT8V)0x40001045)) // RO, global configuration information and status
#define RB_CFG_ROM_READ 0x01 // RO, indicate protected status of Flash ROM code and data: 0=reading protect, 1=enable read by external programmer
#define RB_CFG_RESET_EN 0x04 // RO, manual reset input enable status
#define RB_CFG_BOOT_EN 0x08 // RO, boot-loader enable status
#define RB_CFG_DEBUG_EN 0x10 // RO, debug enable status
#define RB_BOOT_LOADER 0x20 // RO, indicate boot loader status: 0=application status (by software reset), 1=boot loader status
#define R8_RST_WDOG_CTRL (*((PUINT8V)0x40001046)) // RWA, reset and watch-dog control, SAM
#define RB_SOFTWARE_RESET 0x01 // WA/WZ, global software reset, high action, auto clear
#define RB_WDOG_RST_EN 0x02 // RWA, enable watch-dog reset if watch-dog timer overflow: 0=as timer only, 1=enable reset if timer overflow
#define RB_WDOG_INT_EN 0x04 // RWA, watch-dog timer overflow interrupt enable: 0=disable, 1=enable
#define RB_WDOG_INT_FLAG 0x10 // RW1, watch-dog timer overflow interrupt flag, cleared by RW1 or reload watch-dog count or __SEV(Send-Event)
#define R8_GLOB_RESET_KEEP (*((PUINT8V)0x40001047)) // RW, value keeper during global reset
/* System: clock configuration register */
#define R32_CLOCK_CONFIG (*((PUINT32V)0x40001008)) // RWA, clock configuration, SAM
#define R32_CLK_SYS_CFG (*((PUINT32V)0x40001008)) // RWA, system clock configuration, SAM
#define RB_CLK_PLL_DIV 0x1F // RWA, output clock divider from PLL or CK32M
#define RB_CLK_SYS_MOD 0xC0 // RWA, system clock source mode: 00=divided from 32MHz, 01=divided from PLL-480MHz, 10=directly from 32MHz, 11=directly from 32KHz
#define RB_TX_32M_PWR_EN 0x40000 // RWA, extern 32MHz HSE power contorl
#define RB_XT_32M_PWR_EN 0x40000 // RWA, extern 32MHz HSE power contorl
#define RB_XT_FORCE_EN 0x80000 // RWA, system clock control in Halt mode
#define RB_PLL_PWR_EN 0x100000 // RWA, PLL power control
// Fck32k = RB_CLK_OSC32K_XT ? XT_32KHz : RC_32KHz
// Fpll = XT_32MHz * 15 = 480MHz
// Fsys = RB_CLK_SYS_MOD==3 ? Fck32k : ( ( RB_CLK_SYS_MOD[0] ? Fpll : XT_32MHz ) / RB_CLK_PLL_DIV )
// default: Fsys = XT_32MHz / RB_CLK_PLL_DIV = 32MHz / 5 = 6.4MHz
// range: 32KHz, 2MHz~10MHz, 15MHz~80MHz
/* System: sleep control register */
#define R32_SLEEP_CONTROL (*((PUINT32V)0x4000100C)) // RWA, sleep control, SAM
#define R8_SLP_CLK_OFF0 (*((PUINT8V)0x4000100C)) // RWA, sleep clock off control byte 0, SAM
#define RB_SLP_CLK_TMR0 0x01 // RWA, close TMR0 clock
#define RB_SLP_CLK_TMR1 0x02 // RWA, close TMR1 clock
#define RB_SLP_CLK_TMR2 0x04 // RWA, close TMR2 clock
#define RB_SLP_CLK_TMR3 0x08 // RWA, close TMR3 clock
#define RB_SLP_CLK_UART0 0x10 // RWA, close UART0 clock
#define RB_SLP_CLK_UART1 0x20 // RWA, close UART1 clock
#define RB_SLP_CLK_UART2 0x40 // RWA, close UART2 clock
#define RB_SLP_CLK_UART3 0x80 // RWA, close UART3 clock
#define R8_SLP_CLK_OFF1 (*((PUINT8V)0x4000100D)) // RWA, sleep clock off control byte 1, SAM
#define RB_SLP_CLK_SPI0 0x01 // RWA, close SPI0 clock
#define RB_SLP_CLK_PWMX 0x04 // RWA, close PWMx clock
#define RB_SLP_CLK_I2C 0x08 // RWA, close I2C clock
#define RB_SLP_CLK_USB 0x10 // RWA, close USB clock
#define RB_SLP_CLK_LCD 0x40 // RWA, close LCD clock
#define RB_SLP_CLK_BLE 0x80 // RWA, close BLE clock
#define R8_SLP_WAKE_CTRL (*((PUINT8V)0x4000100E)) // RWA, wake control, SAM
#define RB_SLP_USB_WAKE 0x01 // RWA, enable USB waking
//#define RB_SLP_BLE_WAKE 0x04 // RWA, enable BLE waking
#define RB_SLP_RTC_WAKE 0x08 // RWA, enable RTC waking
#define RB_SLP_GPIO_WAKE 0x10 // RWA, enable GPIO waking
#define RB_SLP_BAT_WAKE 0x20 // RWA, enable BAT waking
#define RB_WAKE_EV_MODE 0x40 // RWA, event wakeup mode: 0=event keep valid for long time, 1=short pulse event
#define RB_GPIO_WAKE_MODE 0x80 // RWA,
#define R8_SLP_POWER_CTRL (*((PUINT8V)0x4000100F)) // RWA, peripherals power down control, SAM
#define RB_WAKE_DLY_MOD 0x03 // RWA, wakeup delay time selection
// RB_WAKE_DLY_MOD select wakeup delay
// 00: long time, 3590 cycles+TSUHSE
// 01: short time, 520 cycles+TSUHSE
// 10: shorter time, 70 cycles+TSUHSE
// 11: no delay, 8 cycles+TSUHSE
//#define RB_SLP_USB_PWR_DN 0x01 // RWA, enable USB power down
//#define RB_SLP_BLE_PWR_DN 0x04 // RWA, enable BLE power down
#define RB_SLP_CLK_RAMX 0x10 // RWA, close main SRAM clock
#define RB_SLP_CLK_RAM2K 0x20 // RWA, close retention 2KB SRAM clock
#define RB_RAM_RET_LV 0x40 // RWA, SRAM retention voltage selection: 0=normal, 1=low voltage for low power
#define R32_SLEEP_CTRL2 (*((PUINT32V)0x40001010)) // RWA, touchkey wake up enable
#define RB_TKEY0_5_WAKE_EN 0x003F // RWA, touchkey wake up enable channel 0-5
#define RB_TKEY8_13_WAKE_EN 0x3F00 // RWA, touchkey wake up enable channel 8-13
/* System: I/O pin configuration register */
#define R32_PIN_CONFIG (*((PUINT32V)0x40001018)) // RW, I/O pin configuration
#define R16_PIN_ALTERNATE (*((PUINT16V)0x40001018)) // RW, function pin alternate configuration
#define RB_PIN_TMR0 0x01 // RW, TMR0 alternate pin enable: 0=TMR0/PWM0/CAP0 on PA[9], 1=TMR0_/PWM0_/CAP0_ on PB[23]
#define RB_PIN_TMR1 0x02 // RW, TMR1 alternate pin enable: 0=TMR1/PWM1/CAP1 on PA[10], 1=TMR1_/PWM1_/CAP1_ on PB[10]
#define RB_PIN_TMR2 0x04 // RW, TMR2 alternate pin enable: 0=TMR2/PWM2/CAP2 on PA[11], 1=TMR2_/PWM2_/CAP2_ on PB[11]
#define RB_PIN_TMR3 0x08 // RW, TMR3 alternate pin enable: 0=TMR3/PWM3/CAP3 on PA[2], 1=TMR3_/PWM3_/CAP3_ on PB[22]
#define RB_PIN_UART0 0x10 // RW, RXD0/TXD0 alternate pin enable: 0=RXD0/TXD0 on PB[4]/PB[7], 1=RXD0_/TXD0_ on PA[15]/PA[14]
#define RB_PIN_UART1 0x20 // RW, RXD1/TXD1 alternate pin enable: 0=RXD1/TXD1 on PA[8]/PA[9], 1=RXD1_/TXD1_ on PB[12]/PB[13]
#define RB_PIN_UART2 0x40 // RW, RXD2/TXD2 alternate pin enable: 0=RXD2/TXD2 on PA[6]/PA[7], 1=RXD2_/TXD2_ on PB[22]/PB[23]
#define RB_PIN_UART3 0x80 // RW, RXD3/TXD3 alternate pin enable: 0=RXD3/TXD3 on PA[4]/PA[5], 1=RXD3_/TXD3_ on PB[20]/PB[21]
#define RB_PIN_SPI0 0x100 // RW, SCS/SCK0/MOSI/MISO alternate pin enable: 0=SCS/SCK0/MOSI/MISO on PA[12]/PA[13]/PA[14]/PA[15], 1=SCS_/SCK0_/MOSI_/MISO_ on PB[12]/PB[13]/PB[14]/PB[15]
#define RB_PIN_PWMX 0x400 // RW, PWM4/PWM5 alternate pin enable: 0=PWM4/5 on PA[12]/PA[13], 1=PWM4/5 on PA[6]/PA[7]
#define RB_PIN_I2C 0x800 // RW, SCL/SDA alternate pin enable: 0=SCL/SDA on PB[13]/PB[12], 1=SCL_/SDA_ on PB[21]/PB[20]
#define RB_PIN_MODEM 0x1000 // RW, DSR/DTR alternate pin enable: 0=DSR/DTR on PB[1]/PB[5], 1=DSR_/DTR_ on PB[14]/PB[15]
#define RB_DEBUG_EN 0x2000 // RW, Debug interface disable control bit: 0=enable debug, 1=disable debug
#define RB_RF_ANT_SW_EN 0x8000 // RW, RF antenna switch control output enable: 0=disable output, 1=output on PB[16]/PB[17]/PB[18]/PB[19]/PB[20]/PB[21]
#define R16_PIN_ANALOG_IE (*((PUINT16V)0x4000101A)) // RW, analog pin enable and digital input disable
#define RB_PIN_USB_DP_PU 0x40 // RW, USB UDP internal pullup resistance enable: 0=enable/disable by RB_UC_DEV_PU_EN, 1=enable pullup, replace RB_UC_DEV_PU_EN under sleep mode
#define RB_PIN_USB_IE 0x80 // RW, USB analog I/O enable: 0=analog I/O disable, 1=analog I/O enable
#define R32_PIN_CONFIG2 (*((PUINT32V)0x4000101C)) // RW, I/O pin configuration
#define RB_PIN_PA4_15_DIS 0xFFF0 // RW, PA4-PA15 digital input disable
#define RB_PIN_PB0_DIS 0x10000 // RW, PB0 digital input disable
#define RB_PIN_PB4_DIS 0x100000 // RW, PB4 digital input disable
#define RB_PIN_PB6_7_DIS 0xC00000 // RW, PB6-PB7 digital input disable
#define RB_PIN_PB22_23_DIS 0x3000000 // RW, PB22-PB23 digital input disable
#define RB_PIN_PB10_15_DIS 0xFC000000 // RW, PB10-PB15 digital input disable
/* System: power management register */
#define R32_POWER_MANAG (*((PUINT32V)0x40001020)) // RWA, power management register, SAM
#define R16_POWER_PLAN (*((PUINT16V)0x40001020)) // RWA, power plan before sleep instruction, SAM
#define RB_PWR_XROM 0x01 // RWA, power for flash ROM
#define RB_PWR_RAM2K 0x02 // RWA, power for retention 2KB SRAM
#define RB_PWR_CORE 0x04 // RWA, power retention for core and base peripherals
#define RB_PWR_EXTEND 0x08 // RWA, power retention for USB and BLE
#define RB_PWR_RAM24K 0x10 // RWA, power for main SRAM
#define RB_MAIN_ACT 0x40 // RWA, main power chose
#define RB_PWR_SYS_EN 0x80 // RWA, power for system
#define RB_PWR_LDO_EN 0x0100 // RWA, LDO enable
#define RB_PWR_DCDC_EN 0x0200 // RWA, DC/DC converter enable: 0=DC/DC disable and bypass, 1=DC/DC enable
#define RB_PWR_DCDC_PRE 0x0400 // RWA, DC/DC converter pre-enable
#define RB_XT_PRE_CFG 0x1800 // RWA, extern 32MHz HSE early wake up time configuration
#define RB_PWR_MUST_1 0x2000 // RWA, must write 1
#define RB_PWR_MUST_0 0x2000 // RWA, must write 1 (reserved)
#define RB_XT_PRE_EN 0x4000 // RWA, extern 32MHz HSE early wake up enable, must be used with LSI/LSE
#define RB_PWR_PLAN_EN 0x8000 // RWA/WZ, power plan enable, auto clear after sleep executed
#define R16_AUX_POWER_ADJ (*((PUINT16V)0x40001022)) // RWA, aux power adjust control, SAM
#define RB_ULPLDO_ADJ 0x0007 // RWA, Ultra-Low-Power LDO voltage adjust
#define RB_DCDC_CHARGE 0x0080 // RWA, DC/DC aux charge enable
/* System: battery detector register */
#define R32_BATTERY_CTRL (*((PUINT32V)0x40001024)) // RWA, battery voltage detector, SAM
#define R8_BAT_DET_CTRL (*((PUINT8V)0x40001024)) // RWA, battery voltage detector control, SAM
#define RB_BAT_DET_EN 0x01 // RWA, battery voltage detector enable if RB_BAT_MON_EN=0
#define RB_BAT_LOW_VTHX 0x01 // RWA, select monitor threshold voltage if RB_BAT_MON_EN=1
#define RB_BAT_MON_EN 0x02 // RWA, battery voltage monitor enable under sleep mode
#define RB_BAT_LOWER_IE 0x04 // RWA, interrupt enable for battery lower voltage
#define RB_BAT_LOW_IE 0x08 // RWA, interrupt enable for battery low voltage
// request NMI interrupt if both RB_BAT_LOWER_IE and RB_BAT_LOW_IE enabled
#define R8_BAT_DET_CFG (*((PUINT8V)0x40001025)) // RWA, battery voltage detector configuration, SAM
#define RB_BAT_LOW_VTH 0x03 // RWA, select detector/monitor threshold voltage of battery voltage low
#define R8_BAT_STATUS (*((PUINT8V)0x40001026)) // RO, battery status
#define RB_BAT_STAT_LOWER 0x01 // RO, battery lower voltage status for detector, high action
#define RB_BAT_STAT_LOW 0x02 // RO, battery low voltage status for detector/monitor, high action
/* System: 32KHz oscillator control register */
#define R32_OSC32K_CTRL (*((PUINT32V)0x4000102C)) // RWA, 32KHz oscillator control, SAM
#define R16_INT32K_TUNE (*((PUINT16V)0x4000102C)) // RWA, internal 32KHz oscillator tune control, SAM
#define RB_INT32K_TUNE 0x1FFF // RWA, internal 32KHz oscillator frequency tune
#define R8_XT32K_TUNE (*((PUINT8V)0x4000102E)) // RWA, external 32KHz oscillator tune control, SAM
#define RB_XT32K_I_TUNE 0x03 // RWA, external 32KHz oscillator current tune: 00=75% current, 01=standard current, 10=150% current, 11=200% current for startup
#define RB_XT32K_C_LOAD 0xF0 // RWA, external 32KHz oscillator load capacitor tune: Cap = RB_XT32K_C_LOAD + 12pF
#define R8_CK32K_CONFIG (*((PUINT8V)0x4000102F)) // RWA, 32KHz oscillator configure
#define RB_CLK_XT32K_PON 0x01 // RWA, external 32KHz oscillator power on
#define RB_CLK_INT32K_PON 0x02 // RWA, internal 32KHz oscillator power on
#define RB_CLK_OSC32K_XT 0x04 // RWA, 32KHz oscillator source selection: 0=RC, 1=XT
#define RB_CLK_OSC32K_FILT 0x08 // RWA, internal 32KHz oscillator low noise mode disable: 1=enable, 0=disable
#define RB_32K_CLK_PIN 0x80 // RO, 32KHz oscillator clock pin status
/* System: real-time clock register */
#define R32_RTC_CTRL (*((PUINT32V)0x40001030)) // RWA, RTC control, SAM
#define R8_RTC_FLAG_CTRL (*((PUINT8V)0x40001030)) // RW, RTC flag and clear control
#define RB_RTC_TMR_CLR 0x10 // RW, set 1 to clear RTC timer action flag, auto clear
#define RB_RTC_TRIG_CLR 0x20 // RW, set 1 to clear RTC trigger action flag, auto clear
#define RB_RTC_TMR_FLAG 0x40 // RO, RTC timer action flag
#define RB_RTC_TRIG_FLAG 0x80 // RO, RTC trigger action flag
#define R8_RTC_MODE_CTRL (*((PUINT8V)0x40001031)) // RWA, RTC mode control, SAM
#define RB_RTC_TMR_MODE 0x07 // RWA, RTC timer mode: 000=0.125S, 001=0.25S, 010=0.5S, 011=1S, 100=2S, 101=4S, 110=8S, 111=16S
#define RB_RTC_IGNORE_B0 0x08 // RWA, force ignore bit0 for trigger mode: 0=compare bit0, 1=ignore bit0
#define RB_RTC_TMR_EN 0x10 // RWA, RTC timer mode enable
#define RB_RTC_TRIG_EN 0x20 // RWA, RTC trigger mode enable
#define RB_RTC_LOAD_LO 0x40 // RWA, set 1 to load RTC count low word R32_RTC_CNT_32K, auto clear after loaded
#define RB_RTC_LOAD_HI 0x80 // RWA, set 1 to load RTC count high word R32_RTC_CNT_DAY, auto clear after loaded
#define R32_RTC_TRIG (*((PUINT32V)0x40001034)) // RWA, RTC trigger value, SAM
#define R32_RTC_CNT_32K (*((PUINT32V)0x40001038)) // RO, RTC count based 32KHz
#define R16_RTC_CNT_32K (*((PUINT16V)0x40001038)) // RO, RTC count based 32KHz
#define R16_RTC_CNT_2S (*((PUINT16V)0x4000103A)) // RO, RTC count based 2 second
#define R32_RTC_CNT_DAY (*((PUINT32V)0x4000103C)) // RO, RTC count based one day, only low 14 bit
/*System: Miscellaneous Control register */
#define R32_MISC_CTRL (*((PUINT32V)0x40001048)) // RWA, miscellaneous control register
#define R8_PLL_CONFIG (*((PUINT8V)0x4000104B)) // RWA, PLL configuration control, SAM
#define RB_PLL_CFG_DAT 0x7F // RWA, PLL configuration control, SAM
/* System: 32MHz oscillator control register */
#define R8_XT32M_TUNE (*((PUINT8V)0x4000104E)) // RWA, external 32MHz oscillator tune control, SAM
#define RB_XT32M_I_BIAS 0x03 // RWA, external 32MHz oscillator bias current tune: 00=75% current, 01=standard current, 10=125% current, 11=150% current
#define RB_XT32M_C_LOAD 0x70 // RWA, external 32MHz oscillator load capacitor tune: Cap = RB_XT32M_C_LOAD * 2 + 10pF
/* System: oscillator frequency calibration register */
#define R32_OSC_CALIB (*((PUINT32V)0x40001050)) // RWA, oscillator frequency calibration, SAM
#define R16_OSC_CAL_CNT (*((PUINT16V)0x40001050)) // RO, system clock count value for 32KHz multi-cycles
#define RB_OSC_CAL_CNT 0x3FFF // RO, system clock count value for 32KHz multi-cycles
#define RB_OSC_CAL_OV_CLR 0x4000 // RW1, indicate R8_OSC_CAL_OV_CNT not zero, set 1 to clear R8_OSC_CAL_OV_CNT
#define RB_OSC_CAL_IF 0x8000 // RW1, interrupt flag for oscillator capture end, set 1 to clear
#define R8_OSC_CAL_OV_CNT (*((PUINT8V)0x40001052)) // RO, oscillator frequency calibration overflow times
#define R8_OSC_CAL_CTRL (*((PUINT8V)0x40001053)) // RWA, oscillator frequency calibration control, SAM
#define RB_OSC_CNT_TOTAL 0x07 // RWA, total cycles mode for oscillator capture
// RB_OSC_CNT_TOTAL: select total cycles for oscillator capture
// 000: 1
// 001: 2
// 010: 4
// 011: 32
// 100: 64
// 101: 128
// 110: 1024
// 111: 2047
#define RB_OSC_CNT_HALT 0x08 // RO, calibration counter halt status: 0=counting, 1=halt for reading count value
#define RB_OSC_CAL_IE 0x10 // RWA, interrupt enable for oscillator capture end
#define RB_OSC_CNT_EN 0x20 // RWA, calibration counter enable
#define RB_OSC_CNT_END 0x40 // RWA, select oscillator capture end mode: 0=normal, 1=append 2 cycles
/* System: ADC and Touch-key register */
#define R32_ADC_CTRL (*((PUINT32V)0x40001058)) // RW, ADC control
#define R8_ADC_CHANNEL (*((PUINT8V)0x40001058)) // RW, ADC input channel selection
#define RB_ADC_CH_INX 0x0F // RW, ADC input channel index
#define R8_ADC_CFG (*((PUINT8V)0x40001059)) // RW, ADC configure
#define RB_ADC_POWER_ON 0x01 // RW, ADC power control: 0=power down, 1=power on
#define RB_ADC_BUF_EN 0x02 // RW, ADC input buffer enable
#define RB_ADC_DIFF_EN 0x04 // RW, ADC input channel mode: 0=single-end, 1=differnetial
#define RB_ADC_OFS_TEST 0x08 // RW, enable ADC offset test mode: 0=normal mode, 1=short to test offset
#define RB_ADC_PGA_GAIN 0x30 // RW, set ADC input PGA gain: 00=-12dB, 01=-6dB, 10=0dB, 11=6dB
#define RB_ADC_CLK_DIV 0xC0 // RW, select ADC clock frequency: 00=3.2MHz, 01=8MHz, 10=5.33MHz, 11=4MHz
#define R8_ADC_CONVERT (*((PUINT8V)0x4000105A)) // RW, ADC convert control
#define RB_ADC_START 0x01 // RW, ADC convert start control: 0=stop ADC convert, 1=start an ADC convert, auto clear
#define RB_ADC_PGA_GAIN2 0x02 // RW, ADC gain direction, must be 0 when using TS
#define RB_ADC_EOC_X 0x80 // RO, end of ADC conversion flag
#define R8_TEM_SENSOR (*((PUINT8V)0x4000105B)) // RW, temperature sensor control
#define RB_TEM_SEN_PWR_ON 0x80 // RW, temperature sensor power control: 0=power down, 1=power on
#define R32_ADC_DATA (*((PUINT32V)0x4000105C)) // RO, ADC data and status
#define R16_ADC_DATA (*((PUINT16V)0x4000105C)) // RO, ADC data
#define RB_ADC_DATA 0x0FFF // RO, ADC conversion data
#define R8_ADC_INT_FLAG (*((PUINT8V)0x4000105E)) // RO, ADC interrupt flag register
#define RB_ADC_IF_EOC 0x80 // RO, ADC conversion interrupt flag: 0=free or converting, 1=end of conversion, interrupt action, auto ADC or write R8_ADC_CONVERT or write R8_TKEY_CONVERT to clear flag
#define R32_TKEY_CTRL (*((PUINT32V)0x40001054)) // RW, Touchkey control
#define R8_TKEY_COUNT (*((PUINT8V)0x40001054)) // RW, Touchkey charge and discharge count
#define RB_TKEY_CHARG_CNT 0x1F // RW, Touchkey charge count
#define RB_TKEY_DISCH_CNT 0xE0 // RW, Touchkey discharge count
#define R8_TKEY_CONVERT (*((PUINT8V)0x40001056)) // RW, Touchkey convert control
#define RB_TKEY_START 0x01 // RW, Touchkey convert start control: 0=stop Touchkey convert, 1=start a Touchkey convert, auto clear
#define R8_TKEY_CFG (*((PUINT8V)0x40001057)) // RW, Touchkey configure
#define RB_TKEY_PWR_ON 0x01 // RW, Touchkey power on: 0=power down, 1=power on
#define RB_TKEY_CURRENT 0x02 // RW, Touchkey charge current selection: 0=35uA, 1=70uA
#define RB_TKEY_DRV_EN 0x04 // RW, Touchkey drive shield enable
#define RB_TKEY_PGA_ADJ 0x08 // RW, ADC input PGA speed selection: 0=slow, 1=fast
#define RB_TKEY_RAND_EN 0x10 // RW, Touchkey random trigger enable
#define RB_TKEY_AUTO_EN 0x20 // RW, Touchkey auto-trigger enable
#define RB_TKEY_DMA_EN 0x40 // RW, Touchkey DMA enable
#define R32_ADC_DMA_CTRL (*((PUINT32V)0x40001060)) // RW, ADC DMA control
#define R8_ADC_CTRL_DMA (*((PUINT8V)0x40001061)) // RW, ADC DMA control
#define RB_ADC_DMA_ENABLE 0x01 // RW, ADC DMA enable
#define RB_ADC_DMA_LOOP 0x04 // RW, ADC DMA address loop enable
#define RB_ADC_IE_DMA_END 0x08 // RW, enable interrupt for ADC DMA completion
#define RB_ADC_IE_EOC 0x10 // RW, enable interrupt for end of ADC conversion
#define RB_ADC_CONT_EN 0x40 // RW, enable contineous conversion ADC
#define RB_ADC_AUTO_EN 0x80 // RW, enable auto continuing ADC for DMA
#define R8_ADC_DMA_IF (*((PUINT8V)0x40001062)) // RW1, ADC interrupt flag
#define RB_ADC_IF_DMA_END 0x08 // RW1, interrupt flag for ADC DMA completion
#define RB_ADC_IF_END_ADC 0x10 // RW1, interrupt flag for end of ADC conversion, DMA for auto ADC or write R8_ADC_CONVERT to clear flag
#define R8_ADC_AUTO_CYCLE (*((PUINT8V)0x40001063)) // RW, auto ADC cycle value, unit is 16 Fsys
#define R32_ADC_DMA_NOW (*((PUINT32V)0x40001064)) // RW, ADC DMA current address
#define R16_ADC_DMA_NOW (*((PUINT16V)0x40001064)) // RW, ADC DMA current address
#define R32_ADC_DMA_BEG (*((PUINT32V)0x40001068)) // RW, ADC DMA begin address
#define R16_ADC_DMA_BEG (*((PUINT16V)0x40001068)) // RW, ADC DMA begin address
#define R32_ADC_DMA_END (*((PUINT32V)0x4000106C)) // RW, ADC DMA end address
#define R16_ADC_DMA_END (*((PUINT16V)0x4000106C)) // RW, ADC DMA end address
#define R32_ADC_SCAN_CFG1 (*((PUINT32V)0x40001070)) // RW, ADC scan config 1
#define RB_ADC_SCAN_CH1 0x0000000F // RW, ADC Channel 1 analog input channel selection bit
#define RB_ADC_SCAN_CH2 0x000000F0 // RW, ADC Channel 2 analog input channel selection bit
#define RB_ADC_SCAN_CH3 0x00000F00 // RW, ADC Channel 3 analog input channel selection bit
#define RB_ADC_SCAN_CH4 0x0000F000 // RW, ADC Channel 4 analog input channel selection bit
#define RB_ADC_SCAN_CH5 0x000F0000 // RW, ADC Channel 5 analog input channel selection bit
#define RB_ADC_SCAN_CH6 0x00F00000 // RW, ADC Channel 6 analog input channel selection bit
#define RB_ADC_SCAN_CH7 0x0F000000 // RW, ADC Channel 7 analog input channel selection bit
#define RB_ADC_SCAN_CH8 0xF0000000 // RW, ADC Channel 8 analog input channel selection bit
#define R32_ADC_SCAN_CFG2 (*((PUINT32V)0x40001074)) // RW, ADC scan config 2
#define RB_ADC_SCAN_CH9 0x0000000F // RW, ADC Channel 9 analog input channel selection bit
#define RB_ADC_SCAN_CH10 0x000000F0 // RW, ADC Channel 10 analog input channel selection bit
#define RB_ADC_SCAN_CH11 0x00000F00 // RW, ADC Channel 11 analog input channel selection bit
#define RB_ADC_SCAN_QUAN 0x000F0000 // RW, Number of ADC scanning channels
#define RB_ADC_SCAN_SEL 0x00100000 // RW, ADC scan function selection: 0=TKEY, 1=ADC
#define RB_ADC_IE_SCAN_END 0x00200000 // RW, ADC scan end interrupt enable: 0=disable, 1=enable
#define RB_ADC_IF_SCAN_END 0x01000000 // RW, ADC scan end flag, write 1 to clear
/* System: Flash ROM control register */
#define R32_FLASH_DATA (*((PUINT32V)0x40001800)) // RO/WO, flash ROM data
#define R32_FLASH_CONTROL (*((PUINT32V)0x40001804)) // RW, flash ROM control
#define R8_FLASH_DATA (*((PUINT8V)0x40001804)) // RO/WO, flash ROM data buffer
#define R8_FLASH_CTRL (*((PUINT8V)0x40001806)) // RW, flash ROM access control
#define R8_FLASH_CFG (*((PUINT8V)0x40001807)) // RW, flash ROM access config, SAM
/* System: GPIO interrupt control register */
#define R32_GPIO_INT_EN (*((PUINT32V)0x40001090)) // RW, GPIO interrupt enable
#define R16_PA_INT_EN (*((PUINT16V)0x40001090)) // RW, GPIO PA interrupt enable
#define R16_PB_INT_EN (*((PUINT16V)0x40001092)) // RW, GPIO PB interrupt enable
#define R32_GPIO_INT_MODE (*((PUINT32V)0x40001094)) // RW, GPIO interrupt mode: 0=level action, 1=edge action
#define R16_PA_INT_MODE (*((PUINT16V)0x40001094)) // RW, GPIO PA interrupt mode: 0=level action, 1=edge action
#define R16_PB_INT_MODE (*((PUINT16V)0x40001096)) // RW, GPIO PB interrupt mode: 0=level action, 1=edge action
#define R32_GPIO_INT_IF (*((PUINT32V)0x4000109C)) // RW1, GPIO interrupt flag
#define R16_PA_INT_IF (*((PUINT16V)0x4000109C)) // RW1, GPIO PA interrupt flag
#define R16_PB_INT_IF (*((PUINT16V)0x4000109E)) // RW1, GPIO PB interrupt flag
/* GPIO PA register */
#define R32_PA_DIR (*((PUINT32V)0x400010A0)) // RW, GPIO PA I/O direction: 0=in, 1=out
#define R8_PA_DIR_0 (*((PUINT8V)0x400010A0)) // RW, GPIO PA I/O direction byte 0
#define R8_PA_DIR_1 (*((PUINT8V)0x400010A1)) // RW, GPIO PA I/O direction byte 1
#define R32_PA_PIN (*((PUINT32V)0x400010A4)) // RO, GPIO PA input
#define R8_PA_PIN_0 (*((PUINT8V)0x400010A4)) // RO, GPIO PA input byte 0
#define R8_PA_PIN_1 (*((PUINT8V)0x400010A5)) // RO, GPIO PA input byte 1
#define R32_PA_OUT (*((PUINT32V)0x400010A8)) // RW, GPIO PA output
#define R8_PA_OUT_0 (*((PUINT8V)0x400010A8)) // RW, GPIO PA output byte 0
#define R8_PA_OUT_1 (*((PUINT8V)0x400010A9)) // RW, GPIO PA output byte 1
#define R32_PA_CLR (*((PUINT32V)0x400010AC)) // WZ, GPIO PA clear output: 0=keep, 1=clear
#define R8_PA_CLR_0 (*((PUINT8V)0x400010AC)) // WZ, GPIO PA clear output byte 0
#define R8_PA_CLR_1 (*((PUINT8V)0x400010AD)) // WZ, GPIO PA clear output byte 1
#define R32_PA_PU (*((PUINT32V)0x400010B0)) // RW, GPIO PA pullup resistance enable
#define R8_PA_PU_0 (*((PUINT8V)0x400010B0)) // RW, GPIO PA pullup resistance enable byte 0
#define R8_PA_PU_1 (*((PUINT8V)0x400010B1)) // RW, GPIO PA pullup resistance enable byte 1
#define R32_PA_PD_DRV (*((PUINT32V)0x400010B4)) // RW, PA pulldown for input or PA driving capability for output
#define R8_PA_PD_DRV_0 (*((PUINT8V)0x400010B4)) // RW, PA pulldown for input or PA driving capability for output byte 0
#define R8_PA_PD_DRV_1 (*((PUINT8V)0x400010B5)) // RW, PA pulldown for input or PA driving capability for output byte 1
/* GPIO PB register */
#define R32_PB_DIR (*((PUINT32V)0x400010C0)) // RW, GPIO PB I/O direction: 0=in, 1=out
#define R8_PB_DIR_0 (*((PUINT8V)0x400010C0)) // RW, GPIO PB I/O direction byte 0
#define R8_PB_DIR_1 (*((PUINT8V)0x400010C1)) // RW, GPIO PB I/O direction byte 1
#define R8_PB_DIR_2 (*((PUINT8V)0x400010C2)) // RW, GPIO PB I/O direction byte 2
#define R32_PB_PIN (*((PUINT32V)0x400010C4)) // RO, GPIO PB input
#define R8_PB_PIN_0 (*((PUINT8V)0x400010C4)) // RO, GPIO PB input byte 0
#define R8_PB_PIN_1 (*((PUINT8V)0x400010C5)) // RO, GPIO PB input byte 1
#define R8_PB_PIN_2 (*((PUINT8V)0x400010C6)) // RO, GPIO PB input byte 2
#define R32_PB_OUT (*((PUINT32V)0x400010C8)) // RW, GPIO PB output
#define R8_PB_OUT_0 (*((PUINT8V)0x400010C8)) // RW, GPIO PB output byte 0
#define R8_PB_OUT_1 (*((PUINT8V)0x400010C9)) // RW, GPIO PB output byte 1
#define R8_PB_OUT_2 (*((PUINT8V)0x400010CA)) // RW, GPIO PB output byte 2
#define R32_PB_CLR (*((PUINT32V)0x400010CC)) // WZ, GPIO PB clear output: 0=keep, 1=clear
#define R8_PB_CLR_0 (*((PUINT8V)0x400010CC)) // WZ, GPIO PB clear output byte 0
#define R8_PB_CLR_1 (*((PUINT8V)0x400010CD)) // WZ, GPIO PB clear output byte 1
#define R8_PB_CLR_2 (*((PUINT8V)0x400010CE)) // WZ, GPIO PB clear output byte 2
#define R32_PB_PU (*((PUINT32V)0x400010D0)) // RW, GPIO PB pullup resistance enable
#define R8_PB_PU_0 (*((PUINT8V)0x400010D0)) // RW, GPIO PB pullup resistance enable byte 0
#define R8_PB_PU_1 (*((PUINT8V)0x400010D1)) // RW, GPIO PB pullup resistance enable byte 1
#define R8_PB_PU_2 (*((PUINT8V)0x400010D2)) // RW, GPIO PB pullup resistance enable byte 2
#define R32_PB_PD_DRV (*((PUINT32V)0x400010D4)) // RW, PB pulldown for input or PB driving capability for output
#define R8_PB_PD_DRV_0 (*((PUINT8V)0x400010D4)) // RW, PB pulldown for input or PB driving capability for output byte 0
#define R8_PB_PD_DRV_1 (*((PUINT8V)0x400010D5)) // RW, PB pulldown for input or PB driving capability for output byte 1
#define R8_PB_PD_DRV_2 (*((PUINT8V)0x400010D6)) // RW, PB pulldown for input or PB driving capability for output byte 2
/* GPIO register address offset and bit define */
#define BA_PA ((PUINT8V)0x400010A0) // point GPIO PA base address
#define BA_PB ((PUINT8V)0x400010C0) // point GPIO PB base address
#define GPIO_DIR 0x00
#define GPIO_DIR_0 0x00
#define GPIO_DIR_1 0x01
#define GPIO_DIR_2 0x02
#define GPIO_PIN 0x04
#define GPIO_PIN_0 0x04
#define GPIO_PIN_1 0x05
#define GPIO_PIN_2 0x06
#define GPIO_OUT 0x08
#define GPIO_OUT_0 0x08
#define GPIO_OUT_1 0x09
#define GPIO_OUT_2 0x0A
#define GPIO_CLR 0x0C
#define GPIO_CLR_0 0x0C
#define GPIO_CLR_1 0x0D
#define GPIO_CLR_2 0x0E
#define GPIO_PU 0x10
#define GPIO_PU_0 0x10
#define GPIO_PU_1 0x11
#define GPIO_PU_2 0x12
#define GPIO_PD_DRV 0x14
#define GPIO_PD_DRV_0 0x14
#define GPIO_PD_DRV_1 0x15
#define GPIO_PD_DRV_2 0x16
/* GPIO alias name */
#define bAIN9 (1<<0) // PA0
#define bSCK1 (1<<0) // PA0
#define bAIN8 (1<<1) // PA1
#define bSDO (1<<1) // PA1
#define bMOSI1 bSDO
#define bAIN7 (1<<2) // PA2
#define bSDI (1<<2) // PA2
#define bMISO1 bSDI
#define bAIN6 (1<<3) // PA3
#define bAIN0 (1<<4) // PA4
#define bRXD3 (1<<4) // PA4
#define bRXD3_ (1<<4) // PA4
#define bAIN1 (1<<5) // PA5
#define bTXD3 (1<<5) // PA5
#define bTXD3_ (1<<5) // PA5
#define bAIN10 (1<<6) // PA6
#define bRXD2_ (1<<6) // PA6
#define bPWM4_ (1<<6) // PA6
#define bAIN11 (1<<7) // PA7
#define bTXD2_ (1<<7) // PA7
#define bPWM5_ (1<<7) // PA7
#define bAIN12 (1<<8) // PA8
#define bRXD1 (1<<8) // PA8
#define bAIN13 (1<<9) // PA9
#define bTMR0 (1<<9) // PA9
#define bCAP0 bTMR0
#define bPWM0 bTMR0
#define bTXD1 (1<<9) // PA9
#define bX32KI (1<<10) // PA10
#define bTMR1 (1<<10) // PA10
#define bCAP1 bTMR1
#define bPWM1 bTMR1
#define bX32KO (1<<11) // PA11
#define bTMR2 (1<<11) // PA11
#define bCAP2 bTMR2
#define bPWM2 bTMR2
#define bAIN2 (1<<12) // PA12
#define bPWM4 (1<<12) // PA12
#define bSCS (1<<12) // PA12
#define bAIN3 (1<<13) // PA13
#define bSCK0 (1<<13) // PA13
#define bPWM5 (1<<13) // PA13
#define bAIN4 (1<<14) // PA14
#define bMOSI (1<<14) // PA14
#define bTXD0_ (1<<14) // PA14
#define bAIN5 (1<<15) // PA15
#define bMISO (1<<15) // PA15
#define bRXD0_ (1<<15) // PA15
#define bPWM6 (1<<0) // PB0
#define bCTS (1<<0) // PB0
#define bDSR (1<<1) // PB1
#define bPWM7_ (1<<1) // PB1
#define bRI (1<<2) // PB2
#define bPWM8_ (1<<2) // PB2
#define bDCD (1<<3) // PB3
#define bPWM9_ (1<<3) // PB3
#define bPWM7 (1<<4) // PB4
#define bRXD0 (1<<4) // PB4
#define bDTR (1<<5) // PB5
#define bRTS (1<<6) // PB6
#define bPWM8 (1<<6) // PB6
#define bTXD0 (1<<7) // PB7
#define bPWM9 (1<<7) // PB7
#define bUDM (1<<10) // PB10
#define bTMR1_ (1<<10) // PB10
#define bCAP1_ bTMR1_
#define bPWM1_ bTMR1_
#define bUDP (1<<11) // PB11
#define bTMR2_ (1<<11) // PB11
#define bCAP2_ bTMR2_
#define bPWM2_ bTMR2_
#define bU2DM (1<<12) // PB12
#define bSCS_ (1<<12) // PB12
#define bRXD1_ (1<<12) // PB12
#define bU2DP (1<<13) // PB13
#define bSCK0_ (1<<13) // PB13
#define bTXD1_ (1<<13) // PB13
#define bTIO (1<<14) // PB14
#define bDSR_ (1<<14) // PB14
#define bMOSI_ (1<<14) // PB14
#define bSDA (1<<14) // PB14
#define bPWM10 (1<<14) // PB14
#define bTCK (1<<15) // PB15
#define bMISO_ (1<<15) // PB15
#define bSCL (1<<15) // PB15
#define bDTR_ (1<<15) // PB15
#define bRXD2 (1<<22) // PB22
#define bTMR3 (1<<22) // PB22
#define bCAP3 bTMR3
#define bPWM3 bTMR3
#define bTMR3_ (1<<22) // PB22
#define bCAP3_ bTMR3_
#define bPWM3_ bTMR3_
#define bRST (1<<23) // PB23
#define bTMR0_ (1<<23) // PB23
#define bCAP0_ bTMR0_
#define bPWM0_ bTMR0_
#define bTXD2 (1<<23) // PB23
#define bPWM11 (1<<23) // PB23
/* Timer0 register */
#define R32_TMR0_CONTROL (*((PUINT32V)0x40002000)) // RW, TMR0 control
#define R8_TMR0_CTRL_MOD (*((PUINT8V)0x40002000)) // RW, TMR0 mode control
#define R8_TMR0_INTER_EN (*((PUINT8V)0x40002002)) // RW, TMR0 interrupt enable
// #define R32_TMR0_STATUS (*((PUINT32V)0x40002004)) // RW, TMR0 status
#define R8_TMR0_INT_FLAG (*((PUINT8V)0x40002006)) // RW1, TMR0 interrupt flag
#define R8_TMR0_FIFO_COUNT (*((PUINT8V)0x40002007)) // RO, TMR0 FIFO count status
#define R32_TMR0_COUNT (*((PUINT32V)0x40002008)) // RO, TMR0 current count
#define R16_TMR0_COUNT (*((PUINT16V)0x40002008)) // RO, TMR0 current count
#define R8_TMR0_COUNT (*((PUINT8V)0x40002008)) // RO, TMR0 current count
#define R32_TMR0_CNT_END (*((PUINT32V)0x4000200C)) // RW, TMR0 end count value, only low 26 bit
#define R32_TMR0_FIFO (*((PUINT32V)0x40002010)) // RO/WO, TMR0 FIFO register, only low 26 bit
#define R16_TMR0_FIFO (*((PUINT16V)0x40002010)) // RO/WO, TMR0 FIFO register
#define R8_TMR0_FIFO (*((PUINT8V)0x40002010)) // RO/WO, TMR0 FIFO register
/* Timer1 register */
#define R32_TMR1_CONTROL (*((PUINT32V)0x40002400)) // RW, TMR1 control
#define R8_TMR1_CTRL_MOD (*((PUINT8V)0x40002400)) // RW, TMR1 mode control
#define R8_TMR1_CTRL_DMA (*((PUINT8V)0x40002401)) // RW, TMR1 DMA control
#define R8_TMR1_INTER_EN (*((PUINT8V)0x40002402)) // RW, TMR1 interrupt enable
// #define R32_TMR1_STATUS (*((PUINT32V)0x40002404)) // RW, TMR1 status
#define R8_TMR1_INT_FLAG (*((PUINT8V)0x40002406)) // RW1, TMR1 interrupt flag
#define R8_TMR1_FIFO_COUNT (*((PUINT8V)0x40002407)) // RO, TMR1 FIFO count status
#define R32_TMR1_COUNT (*((PUINT32V)0x40002408)) // RO, TMR1 current count
#define R16_TMR1_COUNT (*((PUINT16V)0x40002408)) // RO, TMR1 current count
#define R8_TMR1_COUNT (*((PUINT8V)0x40002408)) // RO, TMR1 current count
#define R32_TMR1_CNT_END (*((PUINT32V)0x4000240C)) // RW, TMR1 end count value, only low 26 bit
#define R32_TMR1_FIFO (*((PUINT32V)0x40002410)) // RO/WO, TMR1 FIFO register, only low 26 bit
#define R16_TMR1_FIFO (*((PUINT16V)0x40002410)) // RO/WO, TMR1 FIFO register
#define R8_TMR1_FIFO (*((PUINT8V)0x40002410)) // RO/WO, TMR1 FIFO register
#define R32_TMR1_DMA_NOW (*((PUINT32V)0x40002414)) // RW, TMR1 DMA current address
#define R16_TMR1_DMA_NOW (*((PUINT16V)0x40002414)) // RW, TMR1 DMA current address
#define R32_TMR1_DMA_BEG (*((PUINT32V)0x40002418)) // RW, TMR1 DMA begin address
#define R16_TMR1_DMA_BEG (*((PUINT16V)0x40002418)) // RW, TMR1 DMA begin address
#define R32_TMR1_DMA_END (*((PUINT32V)0x4000241C)) // RW, TMR1 DMA end address
#define R16_TMR1_DMA_END (*((PUINT16V)0x4000241C)) // RW, TMR1 DMA end address
/* Timer2 register */
#define R32_TMR2_CONTROL (*((PUINT32V)0x40002800)) // RW, TMR2 control
#define R8_TMR2_CTRL_MOD (*((PUINT8V)0x40002800)) // RW, TMR2 mode control
#define R8_TMR2_CTRL_DMA (*((PUINT8V)0x40002801)) // RW, TMR2 DMA control
#define R8_TMR2_INTER_EN (*((PUINT8V)0x40002802)) // RW, TMR2 interrupt enable
// #define R32_TMR2_STATUS (*((PUINT32V)0x40002804)) // RW, TMR2 status
#define R8_TMR2_INT_FLAG (*((PUINT8V)0x40002806)) // RW1, TMR2 interrupt flag
#define R8_TMR2_FIFO_COUNT (*((PUINT8V)0x40002807)) // RO, TMR2 FIFO count status
#define R32_TMR2_COUNT (*((PUINT32V)0x40002808)) // RO, TMR2 current count
#define R16_TMR2_COUNT (*((PUINT16V)0x40002808)) // RO, TMR2 current count
#define R8_TMR2_COUNT (*((PUINT8V)0x40002808)) // RO, TMR2 current count
#define R32_TMR2_CNT_END (*((PUINT32V)0x4000280C)) // RW, TMR2 end count value, only low 26 bit
#define R32_TMR2_FIFO (*((PUINT32V)0x40002810)) // RO/WO, TMR2 FIFO register, only low 26 bit
#define R16_TMR2_FIFO (*((PUINT16V)0x40002810)) // RO/WO, TMR2 FIFO register
#define R8_TMR2_FIFO (*((PUINT8V)0x40002810)) // RO/WO, TMR2 FIFO register
#define R32_TMR2_DMA_NOW (*((PUINT32V)0x40002814)) // RW, TMR2 DMA current address
#define R16_TMR2_DMA_NOW (*((PUINT16V)0x40002814)) // RW, TMR2 DMA current address
#define R32_TMR2_DMA_BEG (*((PUINT32V)0x40002818)) // RW, TMR2 DMA begin address
#define R16_TMR2_DMA_BEG (*((PUINT16V)0x40002818)) // RW, TMR2 DMA begin address
#define R32_TMR2_DMA_END (*((PUINT32V)0x4000281C)) // RW, TMR2 DMA end address
#define R16_TMR2_DMA_END (*((PUINT16V)0x4000281C)) // RW, TMR2 DMA end address
/* Timer3 register */
#define R32_TMR3_CONTROL (*((PUINT32V)0x40002C00)) // RW, TMR3 control
#define R8_TMR3_CTRL_MOD (*((PUINT8V)0x40002C00)) // RW, TMR3 mode control
#define R8_TMR3_INTER_EN (*((PUINT8V)0x40002C02)) // RW, TMR3 interrupt enable
// #define R32_TMR3_STATUS (*((PUINT32V)0x40002C04)) // RW, TMR3 status
#define R8_TMR3_INT_FLAG (*((PUINT8V)0x40002C06)) // RW1, TMR3 interrupt flag
#define R8_TMR3_FIFO_COUNT (*((PUINT8V)0x40002C07)) // RO, TMR3 FIFO count status
#define R32_TMR3_COUNT (*((PUINT32V)0x40002C08)) // RO, TMR3 current count
#define R16_TMR3_COUNT (*((PUINT16V)0x40002C08)) // RO, TMR3 current count
#define R8_TMR3_COUNT (*((PUINT8V)0x40002C08)) // RO, TMR3 current count
#define R32_TMR3_CNT_END (*((PUINT32V)0x40002C0C)) // RW, TMR3 end count value, only low 26 bit
#define R32_TMR3_FIFO (*((PUINT32V)0x40002C10)) // RO/WO, TMR3 FIFO register, only low 26 bit
#define R16_TMR3_FIFO (*((PUINT16V)0x40002C10)) // RO/WO, TMR3 FIFO register
#define R8_TMR3_FIFO (*((PUINT8V)0x40002C10)) // RO/WO, TMR3 FIFO register
/* Timer register address offset and bit define */
#define TMR_FIFO_SIZE 8 // timer FIFO size (depth)
#define BA_TMR0 ((PUINT8V)0x40002000) // point TMR0 base address
#define BA_TMR1 ((PUINT8V)0x40002400) // point TMR1 base address
#define BA_TMR2 ((PUINT8V)0x40002800) // point TMR2 base address
#define BA_TMR3 ((PUINT8V)0x40002C00) // point TMR3 base address
#define TMR_CTRL_MOD 0
#define RB_TMR_MODE_IN 0x01 // RW, timer in mode: 0=timer/PWM, 1=capture/count
#define RB_TMR_ALL_CLEAR 0x02 // RW, force clear timer FIFO and count
#define RB_TMR_COUNT_EN 0x04 // RW, timer count enable
#define RB_TMR_OUT_EN 0x08 // RW, timer output enable
#define RB_TMR_OUT_POLAR 0x10 // RW, timer PWM output polarity: 0=default low and high action, 1=default high and low action
#define RB_TMR_CAP_COUNT 0x10 // RW, count sub-mode if RB_TMR_MODE_IN=1: 0=capture, 1=count
#define RB_TMR_PWM_REPEAT 0xC0 // RW, timer PWM repeat mode: 00=1, 01=4, 10=8, 11-16
#define RB_TMR_CAP_EDGE 0xC0 // RW, timer capture edge mode: 00=disable, 01=edge change, 10=fall to fall, 11-rise to rise
#define TMR_CTRL_DMA 1
#define RB_TMR_DMA_ENABLE 0x01 // RW, timer1/2 DMA enable
#define RB_TMR_DMA_LOOP 0x04 // RW, timer1/2 DMA address loop enable
#define TMR_INTER_EN 2
#define RB_TMR_IE_CYC_END 0x01 // RW, enable interrupt for timer capture count timeout or PWM cycle end
#define RB_TMR_IE_DATA_ACT 0x02 // RW, enable interrupt for timer capture input action or PWM trigger
#define RB_TMR_IE_FIFO_HF 0x04 // RW, enable interrupt for timer FIFO half (capture fifo >=4 or PWM fifo <=3)
#define RB_TMR_IE_DMA_END 0x08 // RW, enable interrupt for timer1/2 DMA completion
#define RB_TMR_IE_FIFO_OV 0x10 // RW, enable interrupt for timer FIFO overflow
#define TMR_INT_FLAG 6
#define RB_TMR_IF_CYC_END 0x01 // RW1, interrupt flag for timer capture count timeout or PWM cycle end
#define RB_TMR_IF_DATA_ACT 0x02 // RW1, interrupt flag for timer capture input action or PWM trigger
#define RB_TMR_IF_FIFO_HF 0x04 // RW1, interrupt flag for timer FIFO half (capture fifo >=4 or PWM fifo <=3)
#define RB_TMR_IF_DMA_END 0x08 // RW1, interrupt flag for timer1/2 DMA completion
#define RB_TMR_IF_FIFO_OV 0x10 // RW1, interrupt flag for timer FIFO overflow
#define TMR_FIFO_COUNT 7
#define TMR_COUNT 0x08
#define TMR_CNT_END 0x0C
#define TMR_FIFO 0x10
#define TMR_DMA_NOW 0x14
#define TMR_DMA_BEG 0x18
#define TMR_DMA_END 0x1C
/* UART0 register */
#define R32_UART0_CTRL (*((PUINT32V)0x40003000)) // RW, UART0 control
#define R8_UART0_MCR (*((PUINT8V)0x40003000)) // RW, UART0 modem control
#define R8_UART0_IER (*((PUINT8V)0x40003001)) // RW, UART0 interrupt enable
#define R8_UART0_FCR (*((PUINT8V)0x40003002)) // RW, UART0 FIFO control
#define R8_UART0_LCR (*((PUINT8V)0x40003003)) // RW, UART0 line control
#define R32_UART0_STAT (*((PUINT32V)0x40003004)) // RO, UART0 status
#define R8_UART0_IIR (*((PUINT8V)0x40003004)) // RO, UART0 interrupt identification
#define R8_UART0_LSR (*((PUINT8V)0x40003005)) // RO, UART0 line status
#define R8_UART0_MSR (*((PUINT8V)0x40003006)) // RO, UART0 modem status
#define R32_UART0_FIFO (*((PUINT32V)0x40003008)) // RW, UART0 data or FIFO port
#define R8_UART0_RBR (*((PUINT8V)0x40003008)) // RO, UART0 receiver buffer, receiving byte
#define R8_UART0_THR (*((PUINT8V)0x40003008)) // WO, UART0 transmitter holding, transmittal byte
#define R8_UART0_RFC (*((PUINT8V)0x4000300A)) // RO, UART0 receiver FIFO count
#define R8_UART0_TFC (*((PUINT8V)0x4000300B)) // RO, UART0 transmitter FIFO count
#define R32_UART0_SETUP (*((PUINT32V)0x4000300C)) // RW, UART0 setup
#define R16_UART0_DL (*((PUINT16V)0x4000300C)) // RW, UART0 divisor latch
#define R8_UART0_DLL (*((PUINT8V)0x4000300C)) // RW, UART0 divisor latch LSB byte
// #define R8_UART0_DLM (*((PUINT8V)0x4000300D)) // RW, UART0 divisor latch MSB byte
#define R8_UART0_DIV (*((PUINT8V)0x4000300E)) // RW, UART0 pre-divisor latch byte, only low 7 bit, from 1 to 0/128
#define R8_UART0_ADR (*((PUINT8V)0x4000300F)) // RW, UART0 slave address: 0xFF=disable, other=enable
/* UART1 register */
#define R32_UART1_CTRL (*((PUINT32V)0x40003400)) // RW, UART1 control
#define R8_UART1_MCR (*((PUINT8V)0x40003400)) // RW, UART1 modem control
#define R8_UART1_IER (*((PUINT8V)0x40003401)) // RW, UART1 interrupt enable
#define R8_UART1_FCR (*((PUINT8V)0x40003402)) // RW, UART1 FIFO control
#define R8_UART1_LCR (*((PUINT8V)0x40003403)) // RW, UART1 line control
#define R32_UART1_STAT (*((PUINT32V)0x40003404)) // RO, UART1 status
#define R8_UART1_IIR (*((PUINT8V)0x40003404)) // RO, UART1 interrupt identification
#define R8_UART1_LSR (*((PUINT8V)0x40003405)) // RO, UART1 line status
#define R32_UART1_FIFO (*((PUINT32V)0x40003408)) // RW, UART1 data or FIFO port
#define R8_UART1_RBR (*((PUINT8V)0x40003408)) // RO, UART1 receiver buffer, receiving byte
#define R8_UART1_THR (*((PUINT8V)0x40003408)) // WO, UART1 transmitter holding, transmittal byte
#define R8_UART1_RFC (*((PUINT8V)0x4000340A)) // RO, UART1 receiver FIFO count
#define R8_UART1_TFC (*((PUINT8V)0x4000340B)) // RO, UART1 transmitter FIFO count
#define R32_UART1_SETUP (*((PUINT32V)0x4000340C)) // RW, UART1 setup
#define R16_UART1_DL (*((PUINT16V)0x4000340C)) // RW, UART1 divisor latch
#define R8_UART1_DLL (*((PUINT8V)0x4000340C)) // RW, UART1 divisor latch LSB byte
// #define R8_UART1_DLM (*((PUINT8V)0x4000340D)) // RW, UART1 divisor latch MSB byte
#define R8_UART1_DIV (*((PUINT8V)0x4000340E)) // RW, UART1 pre-divisor latch byte, only low 7 bit, from 1 to 0/128
/* UART2 register */
#define R32_UART2_CTRL (*((PUINT32V)0x40003800)) // RW, UART2 control
#define R8_UART2_MCR (*((PUINT8V)0x40003800)) // RW, UART2 modem control
#define R8_UART2_IER (*((PUINT8V)0x40003801)) // RW, UART2 interrupt enable
#define R8_UART2_FCR (*((PUINT8V)0x40003802)) // RW, UART2 FIFO control
#define R8_UART2_LCR (*((PUINT8V)0x40003803)) // RW, UART2 line control
#define R32_UART2_STAT (*((PUINT32V)0x40003804)) // RO, UART2 status
#define R8_UART2_IIR (*((PUINT8V)0x40003804)) // RO, UART2 interrupt identification
#define R8_UART2_LSR (*((PUINT8V)0x40003805)) // RO, UART2 line status
#define R32_UART2_FIFO (*((PUINT32V)0x40003808)) // RW, UART2 data or FIFO port
#define R8_UART2_RBR (*((PUINT8V)0x40003808)) // RO, UART2 receiver buffer, receiving byte
#define R8_UART2_THR (*((PUINT8V)0x40003808)) // WO, UART2 transmitter holding, transmittal byte
#define R8_UART2_RFC (*((PUINT8V)0x4000380A)) // RO, UART2 receiver FIFO count
#define R8_UART2_TFC (*((PUINT8V)0x4000380B)) // RO, UART2 transmitter FIFO count
#define R32_UART2_SETUP (*((PUINT32V)0x4000380C)) // RW, UART2 setup
#define R16_UART2_DL (*((PUINT16V)0x4000380C)) // RW, UART2 divisor latch
#define R8_UART2_DLL (*((PUINT8V)0x4000380C)) // RW, UART2 divisor latch LSB byte
// #define R8_UART2_DLM (*((PUINT8V)0x4000380D)) // RW, UART2 divisor latch MSB byte
#define R8_UART2_DIV (*((PUINT8V)0x4000380E)) // RW, UART2 pre-divisor latch byte, only low 7 bit, from 1 to 0/128
/* UART3 register */
#define R32_UART3_CTRL (*((PUINT32V)0x40003C00)) // RW, UART3 control
#define R8_UART3_MCR (*((PUINT8V)0x40003C00)) // RW, UART3 modem control
#define R8_UART3_IER (*((PUINT8V)0x40003C01)) // RW, UART3 interrupt enable
#define R8_UART3_FCR (*((PUINT8V)0x40003C02)) // RW, UART3 FIFO control
#define R8_UART3_LCR (*((PUINT8V)0x40003C03)) // RW, UART3 line control
#define R32_UART3_STAT (*((PUINT32V)0x40003C04)) // RO, UART3 status
#define R8_UART3_IIR (*((PUINT8V)0x40003C04)) // RO, UART3 interrupt identification
#define R8_UART3_LSR (*((PUINT8V)0x40003C05)) // RO, UART3 line status
#define R32_UART3_FIFO (*((PUINT32V)0x40003C08)) // RW, UART3 data or FIFO port
#define R8_UART3_RBR (*((PUINT8V)0x40003C08)) // RO, UART3 receiver buffer, receiving byte
#define R8_UART3_THR (*((PUINT8V)0x40003C08)) // WO, UART3 transmitter holding, transmittal byte
#define R8_UART3_RFC (*((PUINT8V)0x40003C0A)) // RO, UART3 receiver FIFO count
#define R8_UART3_TFC (*((PUINT8V)0x40003C0B)) // RO, UART3 transmitter FIFO count
#define R32_UART3_SETUP (*((PUINT32V)0x40003C0C)) // RW, UART3 setup
#define R16_UART3_DL (*((PUINT16V)0x40003C0C)) // RW, UART3 divisor latch
#define R8_UART3_DLL (*((PUINT8V)0x40003C0C)) // RW, UART3 divisor latch LSB byte
// #define R8_UART3_DLM (*((PUINT8V)0x40003C0D)) // RW, UART3 divisor latch MSB byte
#define R8_UART3_DIV (*((PUINT8V)0x40003C0E)) // RW, UART3 pre-divisor latch byte, only low 7 bit, from 1 to 0/128
/* UART register address offset and bit define */
#define UART_FIFO_SIZE 8 // UART FIFO size (depth)
#define UART_RECV_RDY_SZ 7 // the max FIFO trigger level for UART receiver data available
#define BA_UART0 ((PUINT8V)0x40003000) // point UART0 base address
#define BA_UART1 ((PUINT8V)0x40003400) // point UART1 base address
#define BA_UART2 ((PUINT8V)0x40003800) // point UART2 base address
#define BA_UART3 ((PUINT8V)0x40003C00) // point UART3 base address
#define UART_MCR 0
#define RB_MCR_DTR 0x01 // RW, UART0 control DTR
#define RB_MCR_RTS 0x02 // RW, UART0 control RTS
#define RB_MCR_OUT1 0x04 // RW, UART0 control OUT1
#define RB_MCR_OUT2 0x08 // RW, UART control OUT2
#define RB_MCR_INT_OE 0x08 // RW, UART interrupt output enable
#define RB_MCR_LOOP 0x10 // RW, UART0 enable local loop back
#define RB_MCR_AU_FLOW_EN 0x20 // RW, UART0 enable autoflow control
#define RB_MCR_TNOW 0x40 // RW, UART0 enable TNOW output on DTR pin
#define RB_MCR_HALF 0x80 // RW, UART0 enable half-duplex
#define UART_IER 1
#define RB_IER_RECV_RDY 0x01 // RW, UART interrupt enable for receiver data ready
#define RB_IER_THR_EMPTY 0x02 // RW, UART interrupt enable for THR empty
#define RB_IER_LINE_STAT 0x04 // RW, UART interrupt enable for receiver line status
#define RB_IER_MODEM_CHG 0x08 // RW, UART0 interrupt enable for modem status change
#define RB_IER_DTR_EN 0x10 // RW, UART0 DTR/TNOW output pin enable
#define RB_IER_RTS_EN 0x20 // RW, UART0 RTS output pin enable
#define RB_IER_TXD_EN 0x40 // RW, UART TXD pin enable
#define RB_IER_RESET 0x80 // WZ, UART software reset control, high action, auto clear
#define UART_FCR 2
#define RB_FCR_FIFO_EN 0x01 // RW, UART FIFO enable
#define RB_FCR_RX_FIFO_CLR 0x02 // WZ, clear UART receiver FIFO, high action, auto clear
#define RB_FCR_TX_FIFO_CLR 0x04 // WZ, clear UART transmitter FIFO, high action, auto clear
#define RB_FCR_FIFO_TRIG 0xC0 // RW, UART receiver FIFO trigger level: 00-1byte, 01-2bytes, 10-4bytes, 11-7bytes
#define UART_LCR 3
#define RB_LCR_WORD_SZ 0x03 // RW, UART word bit length: 00-5bit, 01-6bit, 10-7bit, 11-8bit
#define RB_LCR_STOP_BIT 0x04 // RW, UART stop bit length: 0-1bit, 1-2bit
#define RB_LCR_PAR_EN 0x08 // RW, UART parity enable
#define RB_LCR_PAR_MOD 0x30 // RW, UART parity mode: 00-odd, 01-even, 10-mark, 11-space
#define RB_LCR_BREAK_EN 0x40 // RW, UART break control enable
#define RB_LCR_DLAB 0x80 // RW, UART reserved bit
#define RB_LCR_GP_BIT 0x80 // RW, UART general purpose bit
#define UART_IIR 4
#define RB_IIR_NO_INT 0x01 // RO, UART no interrupt flag: 0=interrupt action, 1=no interrupt
#define RB_IIR_INT_MASK 0x0F // RO, UART interrupt flag bit mask
#define RB_IIR_FIFO_ID 0xC0 // RO, UART FIFO enabled flag
#define UART_LSR 5
#define RB_LSR_DATA_RDY 0x01 // RO, UART receiver fifo data ready status
#define RB_LSR_OVER_ERR 0x02 // RZ, UART receiver overrun error
#define RB_LSR_PAR_ERR 0x04 // RZ, UART receiver parity error
#define RB_LSR_FRAME_ERR 0x08 // RZ, UART receiver frame error
#define RB_LSR_BREAK_ERR 0x10 // RZ, UART receiver break error
#define RB_LSR_TX_FIFO_EMP 0x20 // RO, UART transmitter fifo empty status
#define RB_LSR_TX_ALL_EMP 0x40 // RO, UART transmitter all empty status
#define RB_LSR_ERR_RX_FIFO 0x80 // RO, indicate error in UART receiver fifo
#define UART_MSR 6
#define RB_MSR_CTS_CHG 0x01 // RZ, UART0 CTS changed status, high action
#define RB_MSR_DSR_CHG 0x02 // RZ, UART0 DSR changed status, high action
//#define RB_MSR_RI_CHG 0x04 // RZ, UART0 RI changed status, high action
//#define RB_MSR_DCD_CHG 0x08 // RZ, UART0 DCD changed status, high action
#define RB_MSR_CTS 0x10 // RO, UART0 CTS action status
#define RB_MSR_DSR 0x20 // RO, UART0 DSR action status
//#define RB_MSR_RI 0x40 // RO, UART0 RI action status
//#define RB_MSR_DCD 0x80 // RO, UART0 DCD action status
#define UART_RBR 8
#define UART_THR 8
#define UART_RFC 0x0A
#define UART_TFC 0x0B
#define UART_DLL 0x0C
// #define UART_DLM 0x0D
#define UART_DIV 0x0E
#define UART_ADR 0x0F
/* UART interrupt identification values for IIR bits 3:0 */
#define UART_II_SLV_ADDR 0x0E // RO, UART0 slave address match
#define UART_II_LINE_STAT 0x06 // RO, UART interrupt by receiver line status
#define UART_II_RECV_RDY 0x04 // RO, UART interrupt by receiver data available
#define UART_II_RECV_TOUT 0x0C // RO, UART interrupt by receiver fifo timeout
#define UART_II_THR_EMPTY 0x02 // RO, UART interrupt by THR empty
#define UART_II_MODEM_CHG 0x00 // RO, UART0 interrupt by modem status change
#define UART_II_NO_INTER 0x01 // RO, no UART interrupt is pending
/* SPI0 register */
#define R32_SPI0_CONTROL (*((PUINT32V)0x40004000)) // RW, SPI0 control
#define R8_SPI0_CTRL_MOD (*((PUINT8V)0x40004000)) // RW, SPI0 mode control
#define R8_SPI0_CTRL_CFG (*((PUINT8V)0x40004001)) // RW, SPI0 configuration control
#define R8_SPI0_INTER_EN (*((PUINT8V)0x40004002)) // RW, SPI0 interrupt enable
#define R8_SPI0_CLOCK_DIV (*((PUINT8V)0x40004003)) // RW, SPI0 master clock divisor
#define R8_SPI0_SLAVE_PRE (*((PUINT8V)0x40004003)) // RW, SPI0 slave preset value
#define R32_SPI0_STATUS (*((PUINT32V)0x40004004)) // RW, SPI0 status
#define R8_SPI0_BUFFER (*((PUINT8V)0x40004004)) // RO, SPI0 data buffer
#define R8_SPI0_RUN_FLAG (*((PUINT8V)0x40004005)) // RO, SPI0 work flag
#define R8_SPI0_INT_FLAG (*((PUINT8V)0x40004006)) // RW1, SPI0 interrupt flag
#define R8_SPI0_FIFO_COUNT (*((PUINT8V)0x40004007)) // RO, SPI0 FIFO count status
#define R32_SPI0_TOTAL_CNT (*((PUINT32V)0x4000400C)) // RW, SPI0 total byte count, only low 12 bit
#define R16_SPI0_TOTAL_CNT (*((PUINT16V)0x4000400C)) // RW, SPI0 total byte count, only low 12 bit
#define R32_SPI0_FIFO (*((PUINT32V)0x40004010)) // RW, SPI0 FIFO register
#define R8_SPI0_FIFO (*((PUINT8V)0x40004010)) // RO/WO, SPI0 FIFO register
#define R8_SPI0_FIFO_COUNT1 (*((PUINT8V)0x40004013)) // RO, SPI0 FIFO count status
#define R32_SPI0_DMA_NOW (*((PUINT32V)0x40004014)) // RW, SPI0 DMA current address
#define R16_SPI0_DMA_NOW (*((PUINT16V)0x40004014)) // RW, SPI0 DMA current address
#define R32_SPI0_DMA_BEG (*((PUINT32V)0x40004018)) // RW, SPI0 DMA begin address
#define R16_SPI0_DMA_BEG (*((PUINT16V)0x40004018)) // RW, SPI0 DMA begin address
#define R32_SPI0_DMA_END (*((PUINT32V)0x4000401C)) // RW, SPI0 DMA end address
#define R16_SPI0_DMA_END (*((PUINT16V)0x4000401C)) // RW, SPI0 DMA end address
/* SPI register address offset and bit define */
#define SPI_FIFO_SIZE 8 // SPI FIFO size (depth)
#define BA_SPI0 ((PUINT8V)0x40004000) // point SPI0 base address
#define SPI_CTRL_MOD 0
#define RB_SPI_MODE_SLAVE 0x01 // RW, SPI0 slave mode: 0=master/host, 1=slave/device
#define RB_SPI_ALL_CLEAR 0x02 // RW, force clear SPI FIFO and count
#define RB_SPI_2WIRE_MOD 0x04 // RW, SPI0 enable 2 wire mode for slave: 0=3wire(SCK0,MOSI,MISO), 1=2wire(SCK0,MISO=MXSX)
#define RB_SPI_MST_SCK_MOD 0x08 // RW, SPI master clock mode: 0=mode 0, 1=mode 3
#define RB_SPI_SLV_CMD_MOD 0x08 // RW, SPI0 slave command mode: 0=byte stream, 1=first byte command
#define RB_SPI_FIFO_DIR 0x10 // RW, SPI FIFO direction: 0=out(write @master mode), 1=in(read @master mode)
#define RB_SPI_SCK_OE 0x20 // RW, SPI SCK output enable
#define RB_SPI_MOSI_OE 0x40 // RW, SPI MOSI output enable
#define RB_SPI_MISO_OE 0x80 // RW, SPI MISO output enable
#define SPI_CTRL_CFG 1
#define RB_SPI_DMA_ENABLE 0x01 // RW, SPI0 DMA enable
#define RB_SPI_DMA_LOOP 0x04 // RW, SPI0 DMA address loop enable
#define RB_SPI_AUTO_IF 0x10 // RW, enable buffer/FIFO accessing to auto clear RB_SPI_IF_BYTE_END interrupt flag
#define RB_SPI_BIT_ORDER 0x20 // RW, SPI bit data order: 0=MSB first, 1=LSB first
#define RB_SPI_MST_DLY_EN 0x40 // RW, SPI master input delay enable
#define SPI_INTER_EN 2
#define RB_SPI_IE_CNT_END 0x01 // RW, enable interrupt for SPI total byte count end
#define RB_SPI_IE_BYTE_END 0x02 // RW, enable interrupt for SPI byte exchanged
#define RB_SPI_IE_FIFO_HF 0x04 // RW, enable interrupt for SPI FIFO half
#define RB_SPI_IE_DMA_END 0x08 // RW, enable interrupt for SPI0 DMA completion
#define RB_SPI_IE_FIFO_OV 0x10 // RW, enable interrupt for SPI0 FIFO overflow
#define RB_SPI_IE_FST_BYTE 0x80 // RW, enable interrupt for SPI0 slave mode first byte received
#define SPI_CLOCK_DIV 3
#define SPI_SLAVE_PRESET 3
#define SPI_BUFFER 4
#define SPI_RUN_FLAG 5
#define RB_SPI_SLV_CMD_ACT 0x10 // RO, SPI0 slave first byte / command flag
#define RB_SPI_FIFO_READY 0x20 // RO, SPI FIFO ready status
#define RB_SPI_SLV_CS_LOAD 0x40 // RO, SPI0 slave chip-select loading status
#define RB_SPI_SLV_SELECT 0x80 // RO, SPI0 slave selection status
#define SPI_INT_FLAG 6
#define RB_SPI_IF_CNT_END 0x01 // RW1, interrupt flag for SPI total byte count end
#define RB_SPI_IF_BYTE_END 0x02 // RW1, interrupt flag for SPI byte exchanged
#define RB_SPI_IF_FIFO_HF 0x04 // RW1, interrupt flag for SPI FIFO half (RB_SPI_FIFO_DIR ? >=4bytes : <4bytes)
#define RB_SPI_IF_DMA_END 0x08 // RW1, interrupt flag for SPI0 DMA completion
#define RB_SPI_IF_FIFO_OV 0x10 // RW1, interrupt flag for SPI0 FIFO overflow
#define RB_SPI_FREE 0x40 // RO, current SPI free status
#define RB_SPI_IF_FST_BYTE 0x80 // RW1, interrupt flag for SPI0 slave mode first byte received
#define SPI_FIFO_COUNT 7
#define SPI_TOTAL_CNT 0x0C
#define SPI_FIFO 0x10
#define SPI_DMA_NOW 0x14
#define SPI_DMA_BEG 0x18
#define SPI_DMA_END 0x1C
/* I2C register */
#define R16_I2C_CTRL1 (*((PUINT16V)0x40004800)) // RW, I2C control 1
#define R16_I2C_CTRL2 (*((PUINT16V)0x40004804)) // RW, I2C control 2
#define R16_I2C_OADDR1 (*((PUINT16V)0x40004808)) // RW, I2C own address register 1
#define R16_I2C_OADDR2 (*((PUINT16V)0x4000480C)) // RW, I2C own address register 2
#define R16_I2C_DATAR (*((PUINT16V)0x40004810)) // RW, I2C data register
#define R16_I2C_STAR1 (*((PUINT16V)0x40004814)) // R0, I2C stauts register 1
#define R16_I2C_STAR2 (*((PUINT16V)0x40004818)) // R0, I2C status register 2
// #define R8_I2C_PEC (*((PUINT8V) 0x40004819)) // R0, I2C Packet error checking register
#define R16_I2C_CKCFGR (*((PUINT16V)0x4000481C)) // RW, I2C clock control register
#define R16_I2C_RTR (*((PUINT16V)0x40004820)) // RW, I2C trise register
/* I2C register address offset and bit define */
#define BA_I2C ((PUINT8V)0x40004800) // point I2C base address
#define I2C_CTRL1 0
#define RB_I2C_PE 0x0001 // RW, Peripheral enable
#define RB_I2C_SMBUS 0x0002 // RW, SMBUS mode: 0=I2C mode, 1=SMBUS mode
#define RB_I2C_SMBTYPE 0x0008 // RW, SMBus type: 0=Device, 1=Host
#define RB_I2C_EBARP 0x0010 // RW, ARP enable
#define RB_I2C_ENPEC 0x0020 // RW, PEC ebable
#define RB_I2C_ENGC 0x0040 // RW, General call enable
#define RB_I2C_NOSTRETCH 0x0080 // RW, Clock stretching disable (Slave mode)
#define RB_I2C_START 0x0100 // RW, Start generation: master mode: 0=no start, 1=repeated start; slave mode: 0=no start, 1=start at bus free
#define RB_I2C_STOP 0x0200 // RW, Stop generation: master mode: 0=no stop, 1=stop after the current byte transfer or after the current Start condition is sent; slave mode: 0=no stop, 1=Release the SCL and SDA lines after the current byte transfer
#define RB_I2C_ACK 0x0400 // RW, Acknowledge enable
#define RB_I2C_POS 0x0800 // RW, Acknowledge/PEC Position (for data reception)
#define RB_I2C_PEC 0x1000 // RW, Packet error checking: 0=No PEC transfer, 1=PEC transfer (in Tx or Rx mode)
#define RB_I2C_ALERT 0x2000 // RW, SMBus alert: 0=Releases SMBA pin high, 1=Drives SMBA pin low.
#define RB_I2C_SWRST 0x8000 // RW, Software reset
#define I2C_CTRL2 4
#define RB_I2C_FREQ 0x003F // RW, Peripheral clock frequency, The minimum allowed frequency is 2 MHz,the maximum frequency is 36 MHz
#define RB_I2C_ITERREN 0x0100 // RW, Error interrupt enable
#define RB_I2C_ITEVTEN 0x0200 // RW, Event interrupt enable
#define RB_I2C_ITBUFEN 0x0400 // RW, Buffer interrupt enable
#define I2C_OADDR1 8
#define RB_I2C_ADD0 0x0001 // RW, bit0 of address in 10-bit addressing mode
#define RB_I2C_ADD7_1 0x00FE // RW, bit[7:1] of address
#define RB_I2C_ADD9_8 0x0300 // RW, bit[9:8] of address in 10-bit addressing mode
#define RB_I2C_ADDMODE 0x8000 // RW, Addressing mode (slave mode): 0=7-bit slave address, 1=10-bit slave address
#define I2C_OADDR2 12
#define RB_I2C_ENDUAL 0x0001 // RW, Dual addressing mode enable
#define RB_I2C_ADD2 0x00FE // RW, bit[7:1] of address2
#define I2C_DATAR 16
#define I2C_STAR1 20
#define RB_I2C_SB 0x0001 // RW0, Start bit flag (Master mode)
#define RB_I2C_ADDR 0x0002 // RW0, Address sent (master mode)/matched (slave mode) flag
#define RB_I2C_BTF 0x0004 // RO, Byte transfer finished flag
#define RB_I2C_ADD10 0x0008 // RO, 10-bit header sent flag (Master mode)
#define RB_I2C_STOPF 0x0010 // RO, Stop detection flag (slave mode)
#define RB_I2C_RxNE 0x0040 // RO, Data register not empty flag (receivers)
#define RB_I2C_TxE 0x0080 // RO, Data register empty flag (transmitters)
#define RB_I2C_BERR 0x0100 // RW0, Bus error flag
#define RB_I2C_ARLO 0x0200 // RW0, Arbitration lost flag (master mode)
#define RB_I2C_AF 0x0400 // RW0, Acknowledge failure flag
#define RB_I2C_OVR 0x0800 // RW0, Overrun/Underrun flag
#define RB_I2C_PECERR 0x1000 // RW0, PEC Error flag in reception
#define RB_I2C_TIMEOUT 0x4000 // RW0, Timeout or Tlow error flag
#define RB_I2C_SMBALERT 0x8000 // RW0, SMBus alert flag
#define I2C_STAR2 24
#define RB_I2C_MSL 0x0001 // RO, Mode statu: 0=Slave mode, 1=Master mode
#define RB_I2C_BUSY 0x0002 // RO, Bus busy flag
#define RB_I2C_TRA 0x0004 // RO, Trans flag: 0=data bytes received, 1=data bytes transmitted
#define RB_I2C_GENCALL 0x0010 // RO, General call address (Slave mode) received flag
#define RB_I2C_SMBDEFAULT 0x0020 // RO, SMBus device default address (Slave mode) received flag
#define RB_I2C_SMBHOST 0x0040 // RO, SMBus host header (Slave mode) received flag
#define RB_I2C_DUALF 0x0080 // RO, Dual flag (Slave mode): 0=Received address matched with OAR1, 1=Received address matched with OAR2
#define RB_I2C_PECX 0xFF00 // RO, Packet error checking register
#define I2C_CKCFGR 28
#define RB_I2C_CCR 0x0FFF // RW, Controls the SCL clock in Fm/Sm mode (Master mode)
#define RB_I2C_DUTY 0x4000 // RW, Fm mode duty cycle: 0=L/H=2, 1=L/H=16/9
#define RB_I2C_F_S 0x8000 // RW, I2C master mode selection: 0=standard mode, 1=fast mode
#define I2C_RTR 32
#define RB_I2C_TRISE 0x003F // RW, Maximum rise time in Fm/Sm mode (Master mode)
/* PWM4/5/6/7/8/9/10/11 register */
#define R32_PWM_CONTROL (*((PUINT32V)0x40005000)) // RW, PWM control
#define R8_PWM_OUT_EN (*((PUINT8V)0x40005000)) // RW, PWM output enable control
#define R8_PWM_POLAR (*((PUINT8V)0x40005001)) // RW, PWM output polarity control
#define R8_PWM_CONFIG (*((PUINT8V)0x40005002)) // RW, PWM configuration
#define R8_PWM_CLOCK_DIV (*((PUINT8V)0x40005003)) // RW, PWM clock divisor
#define R32_PWM4_7_DATA (*((PUINT32V)0x40005004)) // RW, PWM4-7 data holding
#define R16_PWM4_DATA (*((PUINT16V)0x40005004)) // RW, PWM4 16bit data holding
#define R16_PWM5_DATA (*((PUINT16V)0x40005006)) // RW, PWM5 16bit data holding
#define R8_PWM4_DATA (*((PUINT8V)0x40005004)) // RW, PWM4 data holding
#define R8_PWM5_DATA (*((PUINT8V)0x40005005)) // RW, PWM5 data holding
#define R8_PWM6_DATA (*((PUINT8V)0x40005006)) // RW, PWM6 data holding
#define R8_PWM7_DATA (*((PUINT8V)0x40005007)) // RW, PWM7 data holding
#define R32_PWM8_11_DATA (*((PUINT32V)0x40005008)) // RW, PWM8-11 data holding
#define R16_PWM6_DATA (*((PUINT16V)0x40005008)) // RW, PWM6 16bit data holding
#define R16_PWM7_DATA (*((PUINT16V)0x4000500A)) // RW, PWM7 16bit data holding
#define R8_PWM8_DATA (*((PUINT8V)0x40005008)) // RW, PWM8 data holding
#define R8_PWM9_DATA (*((PUINT8V)0x40005009)) // RW, PWM9 data holding
#define R8_PWM10_DATA (*((PUINT8V)0x4000500A)) // RW, PWM10 data holding
#define R8_PWM11_DATA (*((PUINT8V)0x4000500B)) // RW, PWM11 data holding
#define R8_PWM_INT_CTRL (*((PUINT32V)0x4000500C)) // RW, PWM interrupt control
#define RB_PWM_IE_CYC 0x01 // RW, enable interrupt for PWM cycle end
#define RB_PWM_CYC_PRE 0x02 // RW, select PWM cycle interrupt point: 0=after count 0xFE (0x7E for 7 bits mode...), 1=after count 0xF0 (0x70 for 7 bits mode...)
#define RB_PWM_IF_CYC 0x80 // RW1, interrupt flag for PWM cycle end
#define R32_PWM_REG_DATA8 (*((PUINT32V)0x40005010)) // RW, PWM8-9 data register
#define R16_PWM8_DATA (*((PUINT16V)0x40005010)) // RW, PWM8 16bit data holding
#define R16_PWM9_DATA (*((PUINT16V)0x40005012)) // RW, PWM9 16bit data holding
#define R32_PWM_REG_CYCLE (*((PUINT32V)0x40005014)) // RW, PWM cycle value
/* PWM4/5/6/7/8/9/10/11 register address offset and bit define */
#define BA_PWMX ((PUINT8V)0x40005000) // point PWM4/5/6/7/8/9/10/11 base address
#define PWM_OUT_EN 0
#define RB_PWM4_OUT_EN 0x01 // RW, PWM4 output enable
#define RB_PWM5_OUT_EN 0x02 // RW, PWM5 output enable
#define RB_PWM6_OUT_EN 0x04 // RW, PWM6 output enable
#define RB_PWM7_OUT_EN 0x08 // RW, PWM7 output enable
#define RB_PWM8_OUT_EN 0x10 // RW, PWM8 output enable
#define RB_PWM9_OUT_EN 0x20 // RW, PWM9 output enable
#define RB_PWM10_OUT_EN 0x40 // RW, PWM10 output enable
#define RB_PWM11_OUT_EN 0x80 // RW, PWM11 output enable
#define PWM_POLAR 1
#define RB_PWM4_POLAR 0x01 // RW, PWM4 output polarity: 0=default low and high action, 1=default high and low action
#define RB_PWM5_POLAR 0x02 // RW, PWM5 output polarity: 0=default low and high action, 1=default high and low action
#define RB_PWM6_POLAR 0x04 // RW, PWM6 output polarity: 0=default low and high action, 1=default high and low action
#define RB_PWM7_POLAR 0x08 // RW, PWM7 output polarity: 0=default low and high action, 1=default high and low action
#define RB_PWM8_POLAR 0x10 // RW, PWM8 output polarity: 0=default low and high action, 1=default high and low action
#define RB_PWM9_POLAR 0x20 // RW, PWM9 output polarity: 0=default low and high action, 1=default high and low action
#define RB_PWM10_POLAR 0x40 // RW, PWM10 output polarity: 0=default low and high action, 1=default high and low action
#define RB_PWM11_POLAR 0x80 // RW, PWM11 output polarity: 0=default low and high action, 1=default high and low action
#define PWM_CONFIG 2
#define RB_PWM_CYCLE_SEL 0x01 // RW, PWM cycle selection: 0=256/128/64/32 clocks, 1=255/127/63/31 clocks
#define RB_PWM_STAG_ST 0x02 // RO, PWM stagger cycle status
#define RB_PWM_CYC_MOD 0x0C // RW, PWM data width mode: 00=8 bits data, 01=7 bits data, 10=6 bits data, 11=16 bits data
#define RB_PWM4_5_STAG_EN 0x10 // RW, PWM4/5 stagger output enable: 0=independent output, 1=stagger output
#define RB_PWM6_7_STAG_EN 0x20 // RW, PWM6/7 stagger output enable: 0=independent output, 1=stagger output
#define RB_PWM8_9_STAG_EN 0x40 // RW, PWM8/9 stagger output enable: 0=independent output, 1=stagger output
#define RB_PWM10_11_STAG_EN 0x80 // RW, PWM10/11 stagger output enable: 0=independent output, 1=stagger output
#define PWM_CLOCK_DIV 3
#define PWM4_DATA_HOLD 4
#define PWM5_DATA_HOLD 5
#define PWM6_DATA_HOLD 6
#define PWM7_DATA_HOLD 7
#define PWM8_DATA_HOLD 8
#define PWM9_DATA_HOLD 9
#define PWM10_DATA_HOLD 10
#define PWM11_DATA_HOLD 11
/* LCD register */
#define R32_LCD_CMD (*((PUINT32V)(0x40006000)))
#define RB_LCD_SYS_EN 0x01 // RW, LCD digital system enable
#define RB_LCD_ON 0x02 // RW, LCD analog system enable
#define RB_LCD_BIAS 0x04 // RW, LCD bias select: 0=1/2 bias, 1=1/3 bias
#define RB_LCD_DUTY 0x18 // RW, LCD duty select: 00=1/2 duty, 01=1/3 duty, 10=1/4 duty
#define RB_LCD_SCAN_CLK 0x60 // RW, LCD scan clock select: 00=256Hz, 01=512Hz, 10=1KHz, 11=128Hz
#define RB_LCD_VLCD_SEL 0x80 // RW, LCD drive voltage：0=VIO33*100%(3.3V),1=VIO33*76%(2.5V)
#define RB_LCD_SEG0_7_EN 0xFF00 // RW, SEG0-SEG7 enable
#define RB_LCD_SEG8_15_EN 0xFF0000 // RW, SEG8-SEG15 enable
#define RB_LCD_SEG16_19_EN 0xF000000 // RW, SEG16-SEG19 enable
#define R32_LCD_RAM0 (*((PUINT32V)(0x40006004))) // RW, LCD driver data0, address 0-3
#define R32_LCD_RAM1 (*((PUINT32V)(0x40006008))) // RW, LCD driver data1, address 4-7
#define R32_LCD_RAM2 (*((PUINT32V)(0x4000600C))) // RW, LCD driver data2, address 8-12
/* Address space define */
#define BA_CODE ((PUINT32)0x00000000) // point code base address
#define SZ_CODE 0x00080000 // code size
#define BA_SFR ((PUINT32)0x40000000) // point SFR base address
#define SZ_SFR 0x00010000 // SFR size
#define BA_RAM ((PUINT32)0x20000000) // point RAM base address
#define SZ_RAM 0x00006800 // RAM size
/* Special Program Space */
#define DATA_FLASH_ADDR 0x70000 // start address of Data-Flash
#define DATA_FLASH_SIZE 0x8000 // size of Data-Flash
#define BOOT_LOAD_ADDR 0x78000 // start address of boot loader program
#define BOOT_LOAD_SIZE 0x6000 // size of boot loader program
#define BOOT_LOAD_CFG 0x7E000 // start address of configuration information for boot loader program
#define ROM_CFG_ADDR 0x7F000 // chip configuration information address
/*----- Reference Information --------------------------------------------*/
#define ID_CH592 0x92 // chip ID
#define ID_CH591 0x91 // chip ID
/* Interrupt routine address and interrupt number */
#define INT_ID_TMR0 16 // interrupt number for Timer0
#define INT_ID_GPIO_A 17 // interrupt number for GPIO port A
#define INT_ID_GPIO_B 18 // interrupt number for GPIO port B
#define INT_ID_SPI0 19 // interrupt number for SPI0
#define INT_ID_BLEB 20 // interrupt number for BLEBB
#define INT_ID_BLEL 21 // interrupt number for BLELLE
#define INT_ID_USB 22 // interrupt number for USB
#define INT_ID_TMR1 24 // interrupt number for Timer1
#define INT_ID_TMR2 25 // interrupt number for Timer2
#define INT_ID_UART0 26 // interrupt number for UART0
#define INT_ID_UART1 27 // interrupt number for UART1
#define INT_ID_RTC 28 // interrupt number for RTC
#define INT_ID_ADC 29 // interrupt number for ADC and TouchKey
#define INT_ID_I2C 30 // interrupt number for I2C
#define INT_ID_PWMX 31 // interrupt number for PWM4~11
#define INT_ID_TMR3 32 // interrupt number for Timer3
#define INT_ID_UART2 33 // interrupt number for UART2
#define INT_ID_UART3 34 // interrupt number for UART3
#define INT_ID_WDOG_BAT 35 // interrupt number for Watch-Dog timer and Battery low voltage
#define INT_VEC_ENTRY_SZ 4 // size of each interrupt vector entry
#define INT_ADDR_TMR0 (INT_ID_TMR0*INT_VEC_ENTRY_SZ) // interrupt vector address for Timer0
#define INT_ADDR_GPIO_A (INT_ID_GPIO_A*INT_VEC_ENTRY_SZ) // interrupt vector address for GPIO port A
#define INT_ADDR_GPIO_B (INT_ID_GPIO_B*INT_VEC_ENTRY_SZ) // interrupt vector address for GPIO port B
#define INT_ADDR_SPI0 (INT_ID_SPI0*INT_VEC_ENTRY_SZ) // interrupt vector address for SPI0
#define INT_ADDR_BLEB (INT_ID_BLEB*INT_VEC_ENTRY_SZ) // interrupt vector address for BLEBB
#define INT_ADDR_BLEL (INT_ID_BLEL*INT_VEC_ENTRY_SZ) // interrupt vector address for BLELLE
#define INT_ADDR_USB (INT_ID_USB*INT_VEC_ENTRY_SZ) // interrupt vector address for USB
#define INT_ADDR_TMR1 (INT_ID_TMR1*INT_VEC_ENTRY_SZ) // interrupt vector address for Timer1
#define INT_ADDR_TMR2 (INT_ID_TMR2*INT_VEC_ENTRY_SZ) // interrupt vector address for Timer2
#define INT_ADDR_UART0 (INT_ID_UART0*INT_VEC_ENTRY_SZ) // interrupt vector address for UART0
#define INT_ADDR_UART1 (INT_ID_UART1*INT_VEC_ENTRY_SZ) // interrupt vector address for UART1
#define INT_ADDR_RTC (INT_ID_RTC*INT_VEC_ENTRY_SZ) // interrupt vector address for RTC
#define INT_ADDR_ADC (INT_ID_ADC*INT_VEC_ENTRY_SZ) // interrupt vector address for ADC and TouchKey
#define INT_ADDR_I2C (INT_ID_I2C*INT_VEC_ENTRY_SZ) // interrupt vector address for I2C
#define INT_ADDR_PWMX (INT_ID_PWMX*INT_VEC_ENTRY_SZ) // interrupt vector address for PWM4~11
#define INT_ADDR_TMR3 (INT_ID_TMR3*INT_VEC_ENTRY_SZ) // interrupt vector address for Timer3
#define INT_ADDR_UART2 (INT_ID_UART2*INT_VEC_ENTRY_SZ) // interrupt vector address for UART2
#define INT_ADDR_UART3 (INT_ID_UART3*INT_VEC_ENTRY_SZ) // interrupt vector address for UART3
#define INT_ADDR_WDOG_BAT (INT_ID_WDOG_BAT*INT_VEC_ENTRY_SZ) // interrupt vector address for Watch-Dog timer and Battery low voltage
#ifndef TABLE_IRQN
#define __PFIC_PRIO_BITS 2 /*!< uses 8 Bits for the Priority Levels */
#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
typedef enum IRQn
{
Reset_IRQn = 1,
NMI_IRQn = 2, /*!< Non Maskable Interrupt */
EXC_IRQn = 3, /*!< Exceptions Interrupt */
SysTick_IRQn = 12, /*!< System timer Interrupt */
SWI_IRQn = 14, /*!< software Interrupt */
TMR0_IRQn = 16,
GPIO_A_IRQn = 17,
GPIO_B_IRQn = 18,
SPI0_IRQn = 19,
BLEB_IRQn = 20,
BLEL_IRQn = 21,
USB_IRQn = 22,
TMR1_IRQn = 24,
TMR2_IRQn = 25,
UART0_IRQn = 26,
UART1_IRQn = 27,
RTC_IRQn = 28,
ADC_IRQn = 29,
I2C_IRQn = 30,
PWMX_IRQn = 31,
TMR3_IRQn = 32,
UART2_IRQn = 33,
UART3_IRQn = 34,
WDOG_BAT_IRQn = 35
} IRQn_Type;
#endif
#ifdef __cplusplus
}
#endif
#endif // __CH592SFR_H__
#ifndef __CH592USBSFR_H__
#define __CH592USBSFR_H__
#ifdef __cplusplus
extern "C" {
#endif
/******************************************************************************/
/* Peripheral memory map */
/******************************************************************************/
/* usb addresses
// USB: +8000H - 83FFH */
#define USB_BASE_ADDR (0x40008000)
#define BA_USB ((PUINT8V)0x40008000) // point USB base address
/* USB */
#define R32_USB_CONTROL (*((PUINT32V)0x40008000)) // USB control & interrupt enable & device address
#define R8_USB_CTRL (*((PUINT8V)0x40008000)) // USB base control
#define RB_UC_HOST_MODE 0x80 // enable USB host mode: 0=device mode, 1=host mode
#define RB_UC_LOW_SPEED 0x40 // enable USB low speed: 0=12Mbps, 1=1.5Mbps
#define RB_UC_DEV_PU_EN 0x20 // USB device enable and internal pullup resistance enable
#define RB_UC_SYS_CTRL1 0x20 // USB system control high bit
#define RB_UC_SYS_CTRL0 0x10 // USB system control low bit
#define MASK_UC_SYS_CTRL 0x30 // bit mask of USB system control
// bUC_HOST_MODE & bUC_SYS_CTRL1 & bUC_SYS_CTRL0: USB system control
// 0 00: disable USB device and disable internal pullup resistance
// 0 01: enable USB device and disable internal pullup resistance, need RB_PIN_USB_DP_PU=1 or need external pullup resistance
// 0 1x: enable USB device and enable internal pullup resistance
// 1 00: enable USB host and normal status
// 1 01: enable USB host and force UDP/UDM output SE0 state
// 1 10: enable USB host and force UDP/UDM output J state
// 1 11: enable USB host and force UDP/UDM output resume or K state
#define RB_UC_INT_BUSY 0x08 // enable automatic responding busy for device mode or automatic pause for host mode during interrupt flag UIF_TRANSFER valid
#define RB_UC_RESET_SIE 0x04 // force reset USB SIE, need software clear
#define RB_UC_CLR_ALL 0x02 // force clear FIFO and count of USB
#define RB_UC_DMA_EN 0x01 // DMA enable and DMA interrupt enable for USB
#define R8_UDEV_CTRL (*((PUINT8V)0x40008001)) // USB device physical prot control
#define RB_UD_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
#define RB_UD_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level
#define RB_UD_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level
#define RB_UD_LOW_SPEED 0x04 // enable USB physical port low speed: 0=full speed, 1=low speed
#define RB_UD_GP_BIT 0x02 // general purpose bit
#define RB_UD_PORT_EN 0x01 // enable USB physical port I/O: 0=disable, 1=enable
#define R8_UHOST_CTRL R8_UDEV_CTRL // USB host physical prot control
#define RB_UH_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
#define RB_UH_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level
#define RB_UH_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level
#define RB_UH_LOW_SPEED 0x04 // enable USB port low speed: 0=full speed, 1=low speed
#define RB_UH_BUS_RESET 0x02 // control USB bus reset: 0=normal, 1=force bus reset
#define RB_UH_PORT_EN 0x01 // enable USB port: 0=disable, 1=enable port, automatic disabled if USB device detached
#define R8_USB_INT_EN (*((PUINT8V)0x40008002)) // USB interrupt enable
#define RB_UIE_DEV_NAK 0x40 // enable interrupt for NAK responded for USB device mode
#define RB_MOD_1_WIRE 0x20 // enable single wire mode
#define RB_UIE_FIFO_OV 0x10 // enable interrupt for FIFO overflow
#define RB_UIE_HST_SOF 0x08 // enable interrupt for host SOF timer action for USB host mode
#define RB_UIE_SUSPEND 0x04 // enable interrupt for USB suspend or resume event
#define RB_UIE_TRANSFER 0x02 // enable interrupt for USB transfer completion
#define RB_UIE_DETECT 0x01 // enable interrupt for USB device detected event for USB host mode
#define RB_UIE_BUS_RST 0x01 // enable interrupt for USB bus reset event for USB device mode
#define R8_USB_DEV_AD (*((PUINT8V)0x40008003)) // USB device address
#define RB_UDA_GP_BIT 0x80 // general purpose bit
#define MASK_USB_ADDR 0x7F // bit mask for USB device address
#define R32_USB_STATUS (*((PUINT32V)0x40008004)) // USB miscellaneous status & interrupt flag & interrupt status
#define R8_USB_MIS_ST (*((PUINT8V)0x40008005)) // USB miscellaneous status
#define RB_UMS_SOF_PRES 0x80 // RO, indicate host SOF timer presage status
#define RB_UMS_SOF_ACT 0x40 // RO, indicate host SOF timer action status for USB host
#define RB_UMS_SIE_FREE 0x20 // RO, indicate USB SIE free status
#define RB_UMS_R_FIFO_RDY 0x10 // RO, indicate USB receiving FIFO ready status (not empty)
#define RB_UMS_BUS_RESET 0x08 // RO, indicate USB bus reset status
#define RB_UMS_SUSPEND 0x04 // RO, indicate USB suspend status
#define RB_UMS_DM_LEVEL 0x02 // RO, indicate UDM level saved at device attached to USB host
#define RB_UMS_DEV_ATTACH 0x01 // RO, indicate device attached status on USB host
#define R8_USB_INT_FG (*((PUINT8V)0x40008006)) // USB interrupt flag
#define RB_U_IS_NAK 0x80 // RO, indicate current USB transfer is NAK received
#define RB_U_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK
#define RB_U_SIE_FREE 0x20 // RO, indicate USB SIE free status
#define RB_UIF_FIFO_OV 0x10 // FIFO overflow interrupt flag for USB, direct bit address clear or write 1 to clear
#define RB_UIF_HST_SOF 0x08 // host SOF timer interrupt flag for USB host, direct bit address clear or write 1 to clear
#define RB_UIF_SUSPEND 0x04 // USB suspend or resume event interrupt flag, direct bit address clear or write 1 to clear
#define RB_UIF_TRANSFER 0x02 // USB transfer completion interrupt flag, direct bit address clear or write 1 to clear
#define RB_UIF_DETECT 0x01 // device detected event interrupt flag for USB host mode, direct bit address clear or write 1 to clear
#define RB_UIF_BUS_RST 0x01 // bus reset event interrupt flag for USB device mode, direct bit address clear or write 1 to clear
#define R8_USB_INT_ST (*((PUINT8V)0x40008007)) // USB interrupt status
#define RB_UIS_SETUP_ACT 0x80 // RO, indicate SETUP token & 8 bytes setup request received for USB device mode
#define RB_UIS_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK
#define RB_UIS_TOKEN1 0x20 // RO, current token PID code bit 1 received for USB device mode
#define RB_UIS_TOKEN0 0x10 // RO, current token PID code bit 0 received for USB device mode
#define MASK_UIS_TOKEN 0x30 // RO, bit mask of current token PID code received for USB device mode
#define UIS_TOKEN_OUT 0x00
#define UIS_TOKEN_IN 0x20
#define UIS_TOKEN_SETUP 0x30
// bUIS_TOKEN1 & bUIS_TOKEN0: current token PID code received for USB device mode, keep last status during SETUP token, clear RB_UIF_TRANSFER ( RB_UIF_TRANSFER from 1 to 0 ) to set free
// 00: OUT token PID received
// 10: IN token PID received
// 11: free
#define MASK_UIS_ENDP 0x0F // RO, bit mask of current transfer endpoint number for USB device mode
#define MASK_UIS_H_RES 0x0F // RO, bit mask of current transfer handshake response for USB host mode: 0000=no response, time out from device, others=handshake response PID received
#define R8_USB_RX_LEN (*((PUINT8V)0x40008008)) // USB receiving length
#define R32_USB_BUF_MODE (*((PUINT32V)0x4000800C)) // USB endpoint buffer mode
#define R8_UEP4_1_MOD (*((PUINT8V)0x4000800C)) // endpoint 4/1 mode
#define RB_UEP1_RX_EN 0x80 // enable USB endpoint 1 receiving (OUT)
#define RB_UEP1_TX_EN 0x40 // enable USB endpoint 1 transmittal (IN)
#define RB_UEP1_BUF_MOD 0x10 // buffer mode of USB endpoint 1
// bUEPn_RX_EN & bUEPn_TX_EN & bUEPn_BUF_MOD: USB endpoint 1/2/3 buffer mode, buffer start address is UEPn_DMA
// 0 0 x: disable endpoint and disable buffer
// 1 0 0: 64 bytes buffer for receiving (OUT endpoint)
// 1 0 1: dual 64 bytes buffer by toggle bit bUEP_R_TOG selection for receiving (OUT endpoint), total=128bytes
// 0 1 0: 64 bytes buffer for transmittal (IN endpoint)
// 0 1 1: dual 64 bytes buffer by toggle bit bUEP_T_TOG selection for transmittal (IN endpoint), total=128bytes
// 1 1 0: 64 bytes buffer for receiving (OUT endpoint) + 64 bytes buffer for transmittal (IN endpoint), total=128bytes
// 1 1 1: dual 64 bytes buffer by bUEP_R_TOG selection for receiving (OUT endpoint) + dual 64 bytes buffer by bUEP_T_TOG selection for transmittal (IN endpoint), total=256bytes
#define RB_UEP4_RX_EN 0x08 // enable USB endpoint 4 receiving (OUT)
#define RB_UEP4_TX_EN 0x04 // enable USB endpoint 4 transmittal (IN)
// bUEP4_RX_EN & bUEP4_TX_EN: USB endpoint 4 buffer mode, buffer start address is UEP0_DMA
// 0 0: single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint)
// 1 0: single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint) + 64 bytes buffer for endpoint 4 receiving (OUT endpoint), total=128bytes
// 0 1: single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint) + 64 bytes buffer for endpoint 4 transmittal (IN endpoint), total=128bytes
// 1 1: single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint)
// + 64 bytes buffer for endpoint 4 receiving (OUT endpoint) + 64 bytes buffer for endpoint 4 transmittal (IN endpoint), total=192bytes
#define R8_UEP2_3_MOD (*((PUINT8V)0x4000800D)) // endpoint 2/3 mode
#define RB_UEP3_RX_EN 0x80 // enable USB endpoint 3 receiving (OUT)
#define RB_UEP3_TX_EN 0x40 // enable USB endpoint 3 transmittal (IN)
#define RB_UEP3_BUF_MOD 0x10 // buffer mode of USB endpoint 3
#define RB_UEP2_RX_EN 0x08 // enable USB endpoint 2 receiving (OUT)
#define RB_UEP2_TX_EN 0x04 // enable USB endpoint 2 transmittal (IN)
#define RB_UEP2_BUF_MOD 0x01 // buffer mode of USB endpoint 2
#define R8_UEP567_MOD (*((PUINT8V)0x4000800E)) // endpoint 5/6/7 mode
#define RB_UEP7_RX_EN 0x20 // enable USB endpoint 7 receiving (OUT)
#define RB_UEP7_TX_EN 0x10 // enable USB endpoint 7 transmittal (IN)
#define RB_UEP6_RX_EN 0x08 // enable USB endpoint 6 receiving (OUT)
#define RB_UEP6_TX_EN 0x04 // enable USB endpoint 6 transmittal (IN)
#define RB_UEP5_RX_EN 0x02 // enable USB endpoint 5 receiving (OUT)
#define RB_UEP5_TX_EN 0x01 // enable USB endpoint 5 transmittal (IN)
// bUEPn_RX_EN & bUEPn_TX_EN: USB endpoint 5/6/7 buffer mode, buffer start address is UEPn_DMA
// 0 0: disable endpoint and disable buffer
// 1 0: 64 bytes buffer for receiving (OUT endpoint)
// 0 1: 64 bytes buffer for transmittal (IN endpoint)
// 1 1: 64 bytes buffer for receiving (OUT endpoint) + 64 bytes buffer for transmittal (IN endpoint), total=128bytes
#define R8_UH_EP_MOD R8_UEP2_3_MOD //host endpoint mode
#define RB_UH_EP_TX_EN 0x40 // enable USB host OUT endpoint transmittal
#define RB_UH_EP_TBUF_MOD 0x10 // buffer mode of USB host OUT endpoint
// bUH_EP_TX_EN & bUH_EP_TBUF_MOD: USB host OUT endpoint buffer mode, buffer start address is UH_TX_DMA
// 0 x: disable endpoint and disable buffer
// 1 0: 64 bytes buffer for transmittal (OUT endpoint)
// 1 1: dual 64 bytes buffer by toggle bit bUH_T_TOG selection for transmittal (OUT endpoint), total=128bytes
#define RB_UH_EP_RX_EN 0x08 // enable USB host IN endpoint receiving
#define RB_UH_EP_RBUF_MOD 0x01 // buffer mode of USB host IN endpoint
// bUH_EP_RX_EN & bUH_EP_RBUF_MOD: USB host IN endpoint buffer mode, buffer start address is UH_RX_DMA
// 0 x: disable endpoint and disable buffer
// 1 0: 64 bytes buffer for receiving (IN endpoint)
// 1 1: dual 64 bytes buffer by toggle bit bUH_R_TOG selection for receiving (IN endpoint), total=128bytes
#define R16_UEP0_DMA (*((PUINT16V)0x40008010)) // endpoint 0 DMA buffer address
#define R16_UEP1_DMA (*((PUINT16V)0x40008014)) // endpoint 1 DMA buffer address
#define R16_UEP2_DMA (*((PUINT16V)0x40008018)) // endpoint 2 DMA buffer address
#define R16_UH_RX_DMA R16_UEP2_DMA // host rx endpoint buffer address
#define R16_UEP3_DMA (*((PUINT16V)0x4000801C)) // endpoint 3 DMA buffer address
#define R16_UH_TX_DMA R16_UEP3_DMA // host tx endpoint buffer address
#define R16_UEP5_DMA (*((PUINT16V)0x40008054)) // endpoint 5 DMA buffer address
#define R16_UEP6_DMA (*((PUINT16V)0x40008058)) // endpoint 6 DMA buffer address
#define R16_UEP7_DMA (*((PUINT16V)0x4000805C)) // endpoint 7 DMA buffer address
#define R32_USB_EP0_CTRL (*((PUINT32V)0x40008020)) // endpoint 0 control & transmittal length
#define R8_UEP0_T_LEN (*((PUINT8V)0x40008020)) // endpoint 0 transmittal length
#define R8_UEP0_CTRL (*((PUINT8V)0x40008022)) // endpoint 0 control
#define R32_USB_EP1_CTRL (*((PUINT32V)0x40008024)) // endpoint 1 control & transmittal length
#define R8_UEP1_T_LEN (*((PUINT8V)0x40008024)) // endpoint 1 transmittal length
#define R8_UEP1_CTRL (*((PUINT8V)0x40008026)) // endpoint 1 control
#define RB_UEP_R_TOG 0x80 // expected data toggle flag of USB endpoint X receiving (OUT): 0=DATA0, 1=DATA1
#define RB_UEP_T_TOG 0x40 // prepared data toggle flag of USB endpoint X transmittal (IN): 0=DATA0, 1=DATA1
#define RB_UEP_AUTO_TOG 0x10 // enable automatic toggle after successful transfer completion on endpoint 1/2/3: 0=manual toggle, 1=automatic toggle
#define RB_UEP_R_RES1 0x08 // handshake response type high bit for USB endpoint X receiving (OUT)
#define RB_UEP_R_RES0 0x04 // handshake response type low bit for USB endpoint X receiving (OUT)
#define MASK_UEP_R_RES 0x0C // bit mask of handshake response type for USB endpoint X receiving (OUT)
#define UEP_R_RES_ACK 0x00
#define UEP_R_RES_TOUT 0x04
#define UEP_R_RES_NAK 0x08
#define UEP_R_RES_STALL 0x0C
// RB_UEP_R_RES1 & RB_UEP_R_RES0: handshake response type for USB endpoint X receiving (OUT)
// 00: ACK (ready)
// 01: no response, time out to host, for non-zero endpoint isochronous transactions
// 10: NAK (busy)
// 11: STALL (error)
#define RB_UEP_T_RES1 0x02 // handshake response type high bit for USB endpoint X transmittal (IN)
#define RB_UEP_T_RES0 0x01 // handshake response type low bit for USB endpoint X transmittal (IN)
#define MASK_UEP_T_RES 0x03 // bit mask of handshake response type for USB endpoint X transmittal (IN)
#define UEP_T_RES_ACK 0x00
#define UEP_T_RES_TOUT 0x01
#define UEP_T_RES_NAK 0x02
#define UEP_T_RES_STALL 0x03
// bUEP_T_RES1 & bUEP_T_RES0: handshake response type for USB endpoint X transmittal (IN)
// 00: DATA0 or DATA1 then expecting ACK (ready)
// 01: DATA0 or DATA1 then expecting no response, time out from host, for non-zero endpoint isochronous transactions
// 10: NAK (busy)
// 11: STALL (error)
#define R8_UH_SETUP R8_UEP1_CTRL // host aux setup
#define RB_UH_PRE_PID_EN 0x80 // USB host PRE PID enable for low speed device via hub
#define RB_UH_SOF_EN 0x40 // USB host automatic SOF enable
#define R32_USB_EP2_CTRL (*((PUINT32V)0x40008028)) // endpoint 2 control & transmittal length
#define R8_UEP2_T_LEN (*((PUINT8V)0x40008028)) // endpoint 2 transmittal length
#define R8_UEP2_CTRL (*((PUINT8V)0x4000802A)) // endpoint 2 control
#define R8_UH_EP_PID R8_UEP2_T_LEN // host endpoint and PID
#define MASK_UH_TOKEN 0xF0 // bit mask of token PID for USB host transfer
#define MASK_UH_ENDP 0x0F // bit mask of endpoint number for USB host transfer
#define R8_UH_RX_CTRL R8_UEP2_CTRL // host receiver endpoint control
#define RB_UH_R_TOG 0x80 // expected data toggle flag of host receiving (IN): 0=DATA0, 1=DATA1
#define RB_UH_R_AUTO_TOG 0x10 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
#define RB_UH_R_RES 0x04 // prepared handshake response type for host receiving (IN): 0=ACK (ready), 1=no response, time out to device, for isochronous transactions
#define R32_USB_EP3_CTRL (*((PUINT32V)0x4000802c)) // endpoint 3 control & transmittal length
#define R8_UEP3_T_LEN (*((PUINT8V)0x4000802c)) // endpoint 3 transmittal length
#define R8_UEP3_CTRL (*((PUINT8V)0x4000802e)) // endpoint 3 control
#define R8_UH_TX_LEN R8_UEP3_T_LEN // host transmittal endpoint transmittal length
#define R8_UH_TX_CTRL R8_UEP3_CTRL // host transmittal endpoint control
#define RB_UH_T_TOG 0x40 // prepared data toggle flag of host transmittal (SETUP/OUT): 0=DATA0, 1=DATA1
#define RB_UH_T_AUTO_TOG 0x10 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
#define RB_UH_T_RES 0x01 // expected handshake response type for host transmittal (SETUP/OUT): 0=ACK (ready), 1=no response, time out from device, for isochronous transactions
#define R32_USB_EP4_CTRL (*((PUINT32V)0x40008030)) // endpoint 4 control & transmittal length
#define R8_UEP4_T_LEN (*((PUINT8V)0x40008030)) // endpoint 4 transmittal length
#define R8_UEP4_CTRL (*((PUINT8V)0x40008032)) // endpoint 4 control
#define R32_USB_EP5_CTRL (*((PUINT32V)0x40008064)) // endpoint 5 control & transmittal length
#define R8_UEP5_T_LEN (*((PUINT8V)0x40008064)) // endpoint 5 transmittal length
#define R8_UEP5_CTRL (*((PUINT8V)0x40008066)) // endpoint 5 control
#define R32_USB_EP6_CTRL (*((PUINT32V)0x40008068)) // endpoint 6 control & transmittal length
#define R8_UEP6_T_LEN (*((PUINT8V)0x40008068)) // endpoint 6 transmittal length
#define R8_UEP6_CTRL (*((PUINT8V)0x4000806A)) // endpoint 6 control
#define R32_USB_EP7_CTRL (*((PUINT32V)0x4000806C)) // endpoint 7 control & transmittal length
#define R8_UEP7_T_LEN (*((PUINT8V)0x4000806C)) // endpoint 7 transmittal length
#define R8_UEP7_CTRL (*((PUINT8V)0x4000806E)) // endpoint 7 control
#ifdef __cplusplus
}
#endif
#endif //__CH592USBSFR_H__
#ifndef __USB_TYPE__
#define __USB_TYPE__
#ifdef __cplusplus
extern "C" {
#endif
/*----- USB constant and structure define --------------------------------*/
/* USB PID */
#ifndef USB_PID_SETUP
#define USB_PID_NULL 0x00 /* reserved PID */
#define USB_PID_SOF 0x05
#define USB_PID_SETUP 0x0D
#define USB_PID_IN 0x09
#define USB_PID_OUT 0x01
#define USB_PID_ACK 0x02
#define USB_PID_NAK 0x0A
#define USB_PID_STALL 0x0E
#define USB_PID_DATA0 0x03
#define USB_PID_DATA1 0x0B
#define USB_PID_PRE 0x0C
#endif
/* USB standard device request code */
#ifndef USB_GET_DESCRIPTOR
#define USB_GET_STATUS 0x00
#define USB_CLEAR_FEATURE 0x01
#define USB_SET_FEATURE 0x03
#define USB_SET_ADDRESS 0x05
#define USB_GET_DESCRIPTOR 0x06
#define USB_SET_DESCRIPTOR 0x07
#define USB_GET_CONFIGURATION 0x08
#define USB_SET_CONFIGURATION 0x09
#define USB_GET_INTERFACE 0x0A
#define USB_SET_INTERFACE 0x0B
#define USB_SYNCH_FRAME 0x0C
#endif
/* USB hub class request code */
#ifndef HUB_GET_DESCRIPTOR
#define HUB_GET_STATUS 0x00
#define HUB_CLEAR_FEATURE 0x01
#define HUB_GET_STATE 0x02
#define HUB_SET_FEATURE 0x03
#define HUB_GET_DESCRIPTOR 0x06
#define HUB_SET_DESCRIPTOR 0x07
#endif
/* USB HID class request code */
#ifndef HID_GET_REPORT
#define HID_GET_REPORT 0x01
#define HID_GET_IDLE 0x02
#define HID_GET_PROTOCOL 0x03
#define HID_SET_REPORT 0x09
#define HID_SET_IDLE 0x0A
#define HID_SET_PROTOCOL 0x0B
#endif
/* Bit define for USB request type */
#ifndef USB_REQ_TYP_MASK
#define USB_REQ_TYP_IN 0x80 /* control IN, device to host */
#define USB_REQ_TYP_OUT 0x00 /* control OUT, host to device */
#define USB_REQ_TYP_READ 0x80 /* control read, device to host */
#define USB_REQ_TYP_WRITE 0x00 /* control write, host to device */
#define USB_REQ_TYP_MASK 0x60 /* bit mask of request type */
#define USB_REQ_TYP_STANDARD 0x00
#define USB_REQ_TYP_CLASS 0x20
#define USB_REQ_TYP_VENDOR 0x40
#define USB_REQ_TYP_RESERVED 0x60
#define USB_REQ_RECIP_MASK 0x1F /* bit mask of request recipient */
#define USB_REQ_RECIP_DEVICE 0x00
#define USB_REQ_RECIP_INTERF 0x01
#define USB_REQ_RECIP_ENDP 0x02
#define USB_REQ_RECIP_OTHER 0x03
#endif
/* USB request type for hub class request */
#ifndef HUB_GET_HUB_DESCRIPTOR
#define HUB_CLEAR_HUB_FEATURE 0x20
#define HUB_CLEAR_PORT_FEATURE 0x23
#define HUB_GET_BUS_STATE 0xA3
#define HUB_GET_HUB_DESCRIPTOR 0xA0
#define HUB_GET_HUB_STATUS 0xA0
#define HUB_GET_PORT_STATUS 0xA3
#define HUB_SET_HUB_DESCRIPTOR 0x20
#define HUB_SET_HUB_FEATURE 0x20
#define HUB_SET_PORT_FEATURE 0x23
#endif
/* Hub class feature selectors */
#ifndef HUB_PORT_RESET
#define HUB_C_HUB_LOCAL_POWER 0
#define HUB_C_HUB_OVER_CURRENT 1
#define HUB_PORT_CONNECTION 0
#define HUB_PORT_ENABLE 1
#define HUB_PORT_SUSPEND 2
#define HUB_PORT_OVER_CURRENT 3
#define HUB_PORT_RESET 4
#define HUB_PORT_POWER 8
#define HUB_PORT_LOW_SPEED 9
#define HUB_C_PORT_CONNECTION 16
#define HUB_C_PORT_ENABLE 17
#define HUB_C_PORT_SUSPEND 18
#define HUB_C_PORT_OVER_CURRENT 19
#define HUB_C_PORT_RESET 20
#endif
/* USB descriptor type */
#ifndef USB_DESCR_TYP_DEVICE
#define USB_DESCR_TYP_DEVICE 0x01
#define USB_DESCR_TYP_CONFIG 0x02
#define USB_DESCR_TYP_STRING 0x03
#define USB_DESCR_TYP_INTERF 0x04
#define USB_DESCR_TYP_ENDP 0x05
#define USB_DESCR_TYP_QUALIF 0x06
#define USB_DESCR_TYP_SPEED 0x07
#define USB_DESCR_TYP_OTG 0x09
#define USB_DESCR_TYP_HID 0x21
#define USB_DESCR_TYP_REPORT 0x22
#define USB_DESCR_TYP_PHYSIC 0x23
#define USB_DESCR_TYP_CS_INTF 0x24
#define USB_DESCR_TYP_CS_ENDP 0x25
#define USB_DESCR_TYP_HUB 0x29
#endif
/* USB device class */
#ifndef USB_DEV_CLASS_HUB
#define USB_DEV_CLASS_RESERVED 0x00
#define USB_DEV_CLASS_AUDIO 0x01
#define USB_DEV_CLASS_COMMUNIC 0x02
#define USB_DEV_CLASS_HID 0x03
#define USB_DEV_CLASS_MONITOR 0x04
#define USB_DEV_CLASS_PHYSIC_IF 0x05
#define USB_DEV_CLASS_POWER 0x06
#define USB_DEV_CLASS_PRINTER 0x07
#define USB_DEV_CLASS_STORAGE 0x08
#define USB_DEV_CLASS_HUB 0x09
#define USB_DEV_CLASS_VEN_SPEC 0xFF
#endif
/* USB endpoint type and attributes */
#ifndef USB_ENDP_TYPE_MASK
#define USB_ENDP_DIR_MASK 0x80
#define USB_ENDP_ADDR_MASK 0x0F
#define USB_ENDP_TYPE_MASK 0x03
#define USB_ENDP_TYPE_CTRL 0x00
#define USB_ENDP_TYPE_ISOCH 0x01
#define USB_ENDP_TYPE_BULK 0x02
#define USB_ENDP_TYPE_INTER 0x03
#endif
#ifndef USB_DEVICE_ADDR
#define USB_DEVICE_ADDR 0x02 /* 默认的USB设备地址 */
#endif
#ifndef DEFAULT_ENDP0_SIZE
#define DEFAULT_ENDP0_SIZE 8 /* default maximum packet size for endpoint 0 */
#endif
#ifndef MAX_PACKET_SIZE
#define MAX_PACKET_SIZE 64 /* maximum packet size */
#endif
#ifndef USB_BO_CBW_SIZE
#define USB_BO_CBW_SIZE 0x1F /* 命令块CBW的总长度 */
#define USB_BO_CSW_SIZE 0x0D /* 命令状态块CSW的总长度 */
#endif
#ifndef USB_BO_CBW_SIG
#define USB_BO_CBW_SIG 0x43425355 /* 命令块CBW识别标志'USBC' */
#define USB_BO_CSW_SIG 0x53425355 /* 命令状态块CSW识别标志'USBS' */
#endif
#ifndef __PACKED
#define __PACKED __attribute__((packed))
#endif
typedef struct __PACKED _USB_SETUP_REQ {
UINT8 bRequestType;
UINT8 bRequest;
UINT16 wValue;
UINT16 wIndex;
UINT16 wLength;
} USB_SETUP_REQ, *PUSB_SETUP_REQ;
typedef struct __PACKED _USB_DEVICE_DESCR {
UINT8 bLength;
UINT8 bDescriptorType;
UINT16 bcdUSB;
UINT8 bDeviceClass;
UINT8 bDeviceSubClass;
UINT8 bDeviceProtocol;
UINT8 bMaxPacketSize0;
UINT16 idVendor;
UINT16 idProduct;
UINT16 bcdDevice;
UINT8 iManufacturer;
UINT8 iProduct;
UINT8 iSerialNumber;
UINT8 bNumConfigurations;
} USB_DEV_DESCR, *PUSB_DEV_DESCR;
typedef struct __PACKED _USB_CONFIG_DESCR {
UINT8 bLength;
UINT8 bDescriptorType;
UINT16 wTotalLength;
UINT8 bNumInterfaces;
UINT8 bConfigurationValue;
UINT8 iConfiguration;
UINT8 bmAttributes;
UINT8 MaxPower;
} USB_CFG_DESCR, *PUSB_CFG_DESCR;
typedef struct __PACKED _USB_INTERF_DESCR {
UINT8 bLength;
UINT8 bDescriptorType;
UINT8 bInterfaceNumber;
UINT8 bAlternateSetting;
UINT8 bNumEndpoints;
UINT8 bInterfaceClass;
UINT8 bInterfaceSubClass;
UINT8 bInterfaceProtocol;
UINT8 iInterface;
} USB_ITF_DESCR, *PUSB_ITF_DESCR;
typedef struct __PACKED _USB_ENDPOINT_DESCR {
UINT8 bLength;
UINT8 bDescriptorType;
UINT8 bEndpointAddress;
UINT8 bmAttributes;
UINT16 wMaxPacketSize;
UINT8 bInterval;
} USB_ENDP_DESCR, *PUSB_ENDP_DESCR;
typedef struct __PACKED _USB_CONFIG_DESCR_LONG {
USB_CFG_DESCR cfg_descr;
USB_ITF_DESCR itf_descr;
USB_ENDP_DESCR endp_descr[1];
} USB_CFG_DESCR_LONG, *PUSB_CFG_DESCR_LONG;
typedef USB_CFG_DESCR_LONG *PXUSB_CFG_DESCR_LONG;
typedef struct __PACKED _USB_HUB_DESCR {
UINT8 bDescLength;
UINT8 bDescriptorType;
UINT8 bNbrPorts;
UINT8 wHubCharacteristicsL;
UINT8 wHubCharacteristicsH;
UINT8 bPwrOn2PwrGood;
UINT8 bHubContrCurrent;
UINT8 DeviceRemovable;
UINT8 PortPwrCtrlMask;
} USB_HUB_DESCR, *PUSB_HUB_DESCR;
typedef USB_HUB_DESCR *PXUSB_HUB_DESCR;
typedef struct __PACKED _USB_HID_DESCR {
UINT8 bLength;
UINT8 bDescriptorType;
UINT16 bcdHID;
UINT8 bCountryCode;
UINT8 bNumDescriptors;
UINT8 bDescriptorTypeX;
UINT8 wDescriptorLengthL;
UINT8 wDescriptorLengthH;
} USB_HID_DESCR, *PUSB_HID_DESCR;
typedef USB_HID_DESCR *PXUSB_HID_DESCR;
typedef struct __PACKED _UDISK_BOC_CBW { /* command of BulkOnly USB-FlashDisk */
UINT32 mCBW_Sig;
UINT32 mCBW_Tag;
UINT32 mCBW_DataLen; /* uppest byte of data length, always is 0 */
UINT8 mCBW_Flag; /* transfer direction and etc. */
UINT8 mCBW_LUN;
UINT8 mCBW_CB_Len; /* length of command block */
UINT8 mCBW_CB_Buf[16]; /* command block buffer */
} UDISK_BOC_CBW, *PUDISK_BOC_CBW;
typedef UDISK_BOC_CBW *PXUDISK_BOC_CBW;
typedef struct __PACKED _UDISK_BOC_CSW { /* status of BulkOnly USB-FlashDisk */
UINT32 mCSW_Sig;
UINT32 mCSW_Tag;
UINT32 mCSW_Residue; /* return: remainder bytes */
UINT8 mCSW_Status; /* return: result status */
} UDISK_BOC_CSW, *PUDISK_BOC_CSW;
typedef UDISK_BOC_CSW *PXUDISK_BOC_CSW;
#ifdef __cplusplus
}
#endif
#endif // __USB_TYPE__
Reference in a new issue View git blame Copy permalink