185 lines
5.3 KiB
C
185 lines
5.3 KiB
C
/********************************** (C) COPYRIGHT *******************************
|
||
* File Name : CH59x_flash.c
|
||
* Author : WCH
|
||
* Version : V1.2
|
||
* Date : 2021/11/17
|
||
* Description
|
||
*********************************************************************************
|
||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||
* Attention: This software (modified or not) and binary are used for
|
||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||
*******************************************************************************/
|
||
|
||
#include "CH59x_common.h"
|
||
|
||
/* RESET_EN */
|
||
#define RESET_Enable 0x00000008
|
||
#define RESET_Disable 0xFFFFFFF7
|
||
|
||
/* LOCKUP_RST_EN */
|
||
#define UART_NO_KEY_Enable 0x00000100
|
||
#define UART_NO_KEY_Disable 0xFFFFFEFF
|
||
|
||
/* BOOT_PIN */
|
||
#define BOOT_PIN_PB22 0x00000200
|
||
#define BOOT_PIN_PB11 0xFFFFFDFF
|
||
|
||
/* FLASH_WRProt */
|
||
#define FLASH_WRProt 0xFFF003FF
|
||
|
||
/*********************************************************************
|
||
* @fn FLASH_ROM_READ
|
||
*
|
||
* @brief Read Flash
|
||
*
|
||
* @param StartAddr - read address
|
||
* @param Buffer - read buffer
|
||
* @param len - read len
|
||
*
|
||
* @return none
|
||
*/
|
||
void FLASH_ROM_READ(uint32_t StartAddr, void *Buffer, uint32_t len)
|
||
{
|
||
uint32_t i, Length = (len + 3) >> 2;
|
||
uint32_t *pCode = (uint32_t *)StartAddr;
|
||
uint32_t *pBuf = (uint32_t *)Buffer;
|
||
|
||
for(i = 0; i < Length; i++)
|
||
{
|
||
*pBuf++ = *pCode++;
|
||
}
|
||
}
|
||
|
||
/*********************************************************************
|
||
* @fn UserOptionByteConfig
|
||
*
|
||
* @brief Configure User Option Byte.需在调用用户配置字生效函数后生效,且每次烧录后只能修改一次
|
||
* (使用该函数，必须使用官方提供的.S文件，同时调用该函数后，两次上电后，两线调试接口默认关闭)
|
||
*
|
||
* @param RESET_EN - 外部复位引脚使能
|
||
* @param BOOT_PIN - ENABLE-使用默认boot脚-PB22,DISABLE-使用boot脚-PB11
|
||
* @param UART_NO_KEY_EN - 串口免按键下载使能
|
||
* @param FLASHProt_Size - 写保护大小(单位4K)
|
||
*
|
||
* @return 0-Success, 1-Err
|
||
*/
|
||
uint8_t UserOptionByteConfig(FunctionalState RESET_EN, FunctionalState BOOT_PIN, FunctionalState UART_NO_KEY_EN,
|
||
uint32_t FLASHProt_Size)
|
||
{
|
||
uint32_t s, t;
|
||
|
||
FLASH_ROM_READ(0x14, &s, 4);
|
||
|
||
if(s == 0xF5F9BDA9)
|
||
{
|
||
s = 0;
|
||
FLASH_EEPROM_CMD(CMD_GET_ROM_INFO, 0x7EFFC, &s, 4);
|
||
s &= 0xFF;
|
||
|
||
if(RESET_EN == ENABLE)
|
||
s |= RESET_Enable;
|
||
else
|
||
s &= RESET_Disable;
|
||
|
||
/* bit[7:0]-bit[31-24] */
|
||
s |= ((~(s << 24)) & 0xFF000000); //高8位 配置信息取反；
|
||
|
||
if(BOOT_PIN == ENABLE)
|
||
s |= BOOT_PIN_PB22;
|
||
if(UART_NO_KEY_EN == ENABLE)
|
||
s |= UART_NO_KEY_Enable;
|
||
|
||
/* bit[23-10] */
|
||
s &= 0xFF0003FF;
|
||
s |= ((FLASHProt_Size << 10) | (5 << 20)) & 0x00FFFC00;
|
||
|
||
/*Write user option byte*/
|
||
FLASH_ROM_WRITE(0x14, &s, 4);
|
||
|
||
/* Verify user option byte */
|
||
FLASH_ROM_READ(0x14, &t, 4);
|
||
|
||
if(s == t)
|
||
return 0;
|
||
else
|
||
return 1;
|
||
}
|
||
|
||
return 1;
|
||
}
|
||
|
||
/*********************************************************************
|
||
* @fn UserOptionByteClose_SWD
|
||
*
|
||
* @brief 关两线调试接口，其余配置值保持不变.需在调用用户配置字生效函数后生效,且每次烧录后只能修改一次
|
||
* (使用该函数，必须使用官方提供的.S文件，同时调用该函数后，两次上电后，两线调试接口默认关闭)
|
||
*
|
||
* @return 0-Success, 1-Err
|
||
*/
|
||
uint8_t UserOptionByteClose_SWD(void)
|
||
{
|
||
uint32_t s, t;
|
||
|
||
FLASH_ROM_READ(0x14, &s, 4);
|
||
|
||
if(s == 0xF3F9BDA9)
|
||
{
|
||
FLASH_EEPROM_CMD(CMD_GET_ROM_INFO, 0x7EFFC, &s, 4);
|
||
|
||
s &= ~((1 << 4) | (1 << 7)); //禁用调试功能， 禁用SPI读写FLASH
|
||
|
||
/* bit[7:0]-bit[31-24] */
|
||
s &= 0x00FFFFFF;
|
||
s |= ((~(s << 24)) & 0xFF000000); //高8位 配置信息取反；
|
||
|
||
/*Write user option byte*/
|
||
FLASH_ROM_WRITE(0x14, &s, 4);
|
||
|
||
/* Verify user option byte */
|
||
FLASH_ROM_READ(0x14, &t, 4);
|
||
|
||
if(s == t)
|
||
return 0;
|
||
else
|
||
return 1;
|
||
}
|
||
|
||
return 1;
|
||
}
|
||
|
||
/*********************************************************************
|
||
* @fn UserOptionByte_Active
|
||
*
|
||
* @brief 用户配置字生效函数，执行后自动复位
|
||
*
|
||
* @return 0-Success, 1-Err
|
||
*/
|
||
void UserOptionByte_Active(void)
|
||
{
|
||
FLASH_ROM_SW_RESET();
|
||
sys_safe_access_enable();
|
||
R16_INT32K_TUNE = 0xFFFF;
|
||
sys_safe_access_disable();
|
||
sys_safe_access_enable();
|
||
R8_RST_WDOG_CTRL |= RB_SOFTWARE_RESET;
|
||
sys_safe_access_disable();
|
||
while(1);
|
||
}
|
||
|
||
/*********************************************************************
|
||
* @fn GET_UNIQUE_ID
|
||
*
|
||
* @brief get 64 bit unique ID
|
||
*
|
||
* @param Buffer - Pointer to the buffer where data should be stored, Must be aligned to 4 bytes.
|
||
*
|
||
* @return 0-SUCCESS (!0)-FAILURE
|
||
*/
|
||
void GET_UNIQUE_ID(uint8_t *Buffer)
|
||
{
|
||
uint16_t temp;
|
||
FLASH_EEPROM_CMD( CMD_GET_ROM_INFO, ROM_CFG_MAC_ADDR, Buffer, 0 );
|
||
temp = (Buffer[0]|(Buffer[1]<<8)) + (Buffer[2]|(Buffer[3]<<8)) + (Buffer[4]|(Buffer[5]<<8));
|
||
Buffer[6] = temp&0xFF;
|
||
Buffer[7] = (temp>>8)&0xFF;
|
||
}
|