169 lines
5.8 KiB
C
169 lines
5.8 KiB
C
/********************************** (C) COPYRIGHT *******************************
|
||
* File Name : CH59x_pwr.h
|
||
* Author : WCH
|
||
* Version : V1.2
|
||
* Date : 2021/11/17
|
||
* Description
|
||
*********************************************************************************
|
||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||
* Attention: This software (modified or not) and binary are used for
|
||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||
*******************************************************************************/
|
||
|
||
#ifndef __CH59x_PWR_H__
|
||
#define __CH59x_PWR_H__
|
||
|
||
#ifdef __cplusplus
|
||
extern "C" {
|
||
#endif
|
||
|
||
#define ROM_CFG_ADR_HW 0x7F00C // config address for hardware config for LDO&OSC and etc
|
||
|
||
/**
|
||
* @brief Peripher CLK control bit define
|
||
*/
|
||
#define BIT_SLP_CLK_TMR0 (0x00000001) /*!< TMR0 peripher clk bit */
|
||
#define BIT_SLP_CLK_TMR1 (0x00000002) /*!< TMR1 peripher clk bit */
|
||
#define BIT_SLP_CLK_TMR2 (0x00000004) /*!< TMR2 peripher clk bit */
|
||
#define BIT_SLP_CLK_TMR3 (0x00000008) /*!< TMR3 peripher clk bit */
|
||
#define BIT_SLP_CLK_UART0 (0x00000010) /*!< UART0 peripher clk bit */
|
||
#define BIT_SLP_CLK_UART1 (0x00000020) /*!< UART1 peripher clk bit */
|
||
#define BIT_SLP_CLK_UART2 (0x00000040) /*!< UART2 peripher clk bit */
|
||
#define BIT_SLP_CLK_UART3 (0x00000080) /*!< UART3 peripher clk bit */
|
||
#define BIT_SLP_CLK_SPI0 (0x00000100) /*!< SPI0 peripher clk bit */
|
||
//#define BIT_SLP_CLK_SPI1 (0x00000200) /*!< SPI1 peripher clk bit */
|
||
#define BIT_SLP_CLK_PWMX (0x00000400) /*!< PWMX peripher clk bit */
|
||
//#define BIT_SLP_CLK_LCD (0x00000800) /*!< LCD peripher clk bit */
|
||
#define BIT_SLP_CLK_USB (0x00001000) /*!< USB peripher clk bit */
|
||
//#define BIT_SLP_CLK_ETH (0x00002000) /*!< ETH peripher clk bit */
|
||
//#define BIT_SLP_CLK_LED (0x00004000) /*!< LED peripher clk bit */
|
||
#define BIT_SLP_CLK_BLE (0x00008000) /*!< BLE peripher clk bit */
|
||
|
||
#define BIT_SLP_CLK_RAMX (0x10000000) /*!< main SRAM RAM16K peripher clk bit */
|
||
#define BIT_SLP_CLK_RAM2K (0x20000000) /*!< RAM2K peripher clk bit */
|
||
#define BIT_SLP_CLK_ALL (0x3000FFFF) /*!< All peripher clk bit */
|
||
|
||
/**
|
||
* @brief unit of controllable power supply
|
||
*/
|
||
#define UNIT_SYS_LSE RB_CLK_XT32K_PON // 外部32K 时钟振荡
|
||
#define UNIT_SYS_LSI RB_CLK_INT32K_PON // 内部32K 时钟振荡
|
||
#define UNIT_SYS_HSE RB_CLK_XT32M_PON // 外部32M 时钟振荡
|
||
#define UNIT_SYS_PLL RB_CLK_PLL_PON // PLL 时钟振荡
|
||
|
||
/**
|
||
* @brief wakeup mode define
|
||
*/
|
||
typedef enum
|
||
{
|
||
Short_Delay = 0,
|
||
Long_Delay,
|
||
|
||
} WakeUP_ModeypeDef;
|
||
|
||
/**
|
||
* @brief wakeup mode define
|
||
*/
|
||
typedef enum
|
||
{
|
||
/* 下面等级将使用高精度监控，210uA消耗 */
|
||
HALevel_1V9 = 0, // 1.7-1.9
|
||
HALevel_2V1, // 1.9-2.1
|
||
HALevel_2V3, // 2.1-2.3
|
||
HALevel_2V5, // 2.3-2.5
|
||
|
||
/* 下面等级将使用低功耗监控，1uA消耗 */
|
||
LPLevel_1V8 = 0x80,
|
||
LPLevel_1V9,
|
||
LPLevel_2V0,
|
||
LPLevel_2V1,
|
||
LPLevel_2V2,
|
||
LPLevel_2V3,
|
||
LPLevel_2V4,
|
||
LPLevel_2V5,
|
||
|
||
} VolM_LevelypeDef;
|
||
|
||
/**
|
||
* @brief 启用内部DC/DC电源，用于节约系统功耗
|
||
*
|
||
* @param s - 是否打开DCDC电源
|
||
*/
|
||
void PWR_DCDCCfg(FunctionalState s);
|
||
|
||
/**
|
||
* @brief 可控单元模块的电源控制
|
||
*
|
||
* @param s - 是否打开电源
|
||
* @param unit - please refer to unit of controllable power supply
|
||
*/
|
||
void PWR_UnitModCfg(FunctionalState s, uint8_t unit);
|
||
|
||
/**
|
||
* @brief 外设时钟控制位
|
||
*
|
||
* @param s - 是否打开对应外设时钟
|
||
* @param perph - please refer to Peripher CLK control bit define
|
||
*/
|
||
void PWR_PeriphClkCfg(FunctionalState s, uint16_t perph);
|
||
|
||
/**
|
||
* @brief 睡眠唤醒源配置
|
||
*
|
||
* @param s - 是否打开此外设睡眠唤醒功能
|
||
* @param perph - 需要设置的唤醒源
|
||
* RB_SLP_USB_WAKE - USB 为唤醒源
|
||
* RB_SLP_RTC_WAKE - RTC 为唤醒源
|
||
* RB_SLP_GPIO_WAKE - GPIO 为唤醒源
|
||
* RB_SLP_BAT_WAKE - BAT 为唤醒源
|
||
* @param mode - refer to WakeUP_ModeypeDef
|
||
*/
|
||
void PWR_PeriphWakeUpCfg(FunctionalState s, uint8_t perph, WakeUP_ModeypeDef mode);
|
||
|
||
/**
|
||
* @brief 电源监控
|
||
*
|
||
* @param s - 是否打开此功能
|
||
* @param vl - refer to VolM_LevelypeDef
|
||
*/
|
||
void PowerMonitor(FunctionalState s, VolM_LevelypeDef vl);
|
||
|
||
/**
|
||
* @brief 低功耗-Idle模式
|
||
*/
|
||
void LowPower_Idle(void);
|
||
|
||
/**
|
||
* @brief 低功耗-Halt模式，此低功耗切到HSI/5时钟运行，唤醒后需要用户自己重新选择系统时钟源
|
||
*/
|
||
void LowPower_Halt(void);
|
||
|
||
/**
|
||
* @brief 低功耗-Sleep模式，此低功耗切到HSI/5时钟运行，唤醒后需要用户自己重新选择系统时钟源
|
||
* @note 注意调用此函数，DCDC功能强制关闭，唤醒后可以手动再次打开
|
||
*
|
||
* @param rm - 供电模块选择
|
||
* RB_PWR_RAM2K - 2K retention SRAM 供电
|
||
* RB_PWR_RAM16K - 16K main SRAM 供电
|
||
* RB_PWR_EXTEND - USB 和 BLE 单元保留区域供电
|
||
* RB_PWR_XROM - FlashROM 供电
|
||
* NULL - 以上单元都断电
|
||
*/
|
||
void LowPower_Sleep(uint16_t rm);
|
||
|
||
/**
|
||
* @brief 低功耗-Shutdown模式，此低功耗切到HSI/5时钟运行，唤醒后需要用户自己重新选择系统时钟源
|
||
* @note 注意调用此函数，DCDC功能强制关闭，唤醒后可以手动再次打开
|
||
*
|
||
* @param rm - 供电模块选择
|
||
* RB_PWR_RAM2K - 2K retention SRAM 供电
|
||
* RB_PWR_RAM16K - 16K main SRAM 供电
|
||
* NULL - 以上单元都断电
|
||
*/
|
||
void LowPower_Shutdown(uint16_t rm);
|
||
|
||
#ifdef __cplusplus
|
||
}
|
||
#endif
|
||
|
||
#endif // __CH59x_PWR_H__
|