initial commit

myapps/blinky-old-32mg/linker_script/efr32mg21.ld

@@ -0,0 +1,292 @@
+/***************************************************************************//**
+ * @file     gcc_EFR32MG21.ld
+ * @brief    GNU Linker Script for Cortex-M based device
+ * @version  V2.2.0
+ * @date     16. December 2020
+ * Linker script for Silicon Labs EFR32MG21 devices
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2024 Silicon Laboratories, Inc. www.silabs.com </b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Zlib
+ *
+ * The licensor of this software is Silicon Laboratories Inc.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ *
+ ******************************************************************************/
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 1024K
+  RAM (rwx)  : ORIGIN = 0x20000000, LENGTH = 96K
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __copy_table_start__
+ *   __copy_table_end__
+ *   __zero_table_start__
+ *   __zero_table_end__
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ *   __StackSeal      (only if ARMv8-M stack sealing is used)
+ */
+
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+  .text :
+  {
+    KEEP(*(.vectors))
+    *(.text*)
+
+    KEEP(*(.init))
+    KEEP(*(.fini))
+
+    /* .ctors */
+    *crtbegin.o(.ctors)
+    *crtbegin?.o(.ctors)
+    *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+    *(SORT(.ctors.*))
+    *(.ctors)
+
+    /* .dtors */
+    *crtbegin.o(.dtors)
+    *crtbegin?.o(.dtors)
+    *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+    *(SORT(.dtors.*))
+    *(.dtors)
+
+    *(.rodata*)
+
+    KEEP(*(.eh_frame*))
+  } > FLASH
+  /*
+   * SG veneers:
+   * All SG veneers are placed in the special output section .gnu.sgstubs. Its start address
+   * must be set, either with the command line option ‘--section-start’ or in a linker script,
+   * to indicate where to place these veneers in memory.
+   */
+/*
+  .gnu.sgstubs : ALIGN(32)
+  {
+    . = ALIGN(32);
+    linker_sg_begin = .;
+    KEEP(*(.gnu.sgstubs*))
+    . = ALIGN(32);
+  } > FLASH
+  linker_sg_end = linker_sg_begin + SIZEOF(.gnu.sgstubs);
+*/
+  .ARM.extab :
+  {
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+  } > FLASH
+
+  __exidx_start = .;
+  .ARM.exidx :
+  {
+    *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+  } > FLASH
+  __exidx_end = .;
+
+  .copy.table :
+  {
+    . = ALIGN(4);
+    __copy_table_start__ = .;
+
+    LONG (__etext)
+    LONG (__data_start__)
+    LONG ((__data_end__ - __data_start__) / 4)
+
+    /* Add each additional data section here */
+/*
+    LONG (__etext2)
+    LONG (__data2_start__)
+    LONG ((__data2_end__ - __data2_start__) / 4)
+*/
+    __copy_table_end__ = .;
+  } > FLASH
+
+  .zero.table :
+  {
+    . = ALIGN(4);
+    __zero_table_start__ = .;
+    /* Add each additional bss section here */
+/*
+    LONG (__bss2_start__)
+    LONG ((__bss2_end__ - __bss2_start__) / 4)
+*/
+    __zero_table_end__ = .;
+    __etext = ALIGN(4);
+  } > FLASH
+
+  .data : AT (__etext)
+  {
+    __data_start__ = .;
+    *(vtable)
+    *(.data*)
+    . = ALIGN (4);
+    PROVIDE (__ram_func_section_start = .);
+    *(.ram)
+    PROVIDE (__ram_func_section_end = .);
+
+    . = ALIGN(4);
+    /* preinit data */
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP(*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+
+    . = ALIGN(4);
+    /* init data */
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP(*(SORT(.init_array.*)))
+    KEEP(*(.init_array))
+    PROVIDE_HIDDEN (__init_array_end = .);
+
+    . = ALIGN(4);
+    /* finit data */
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP(*(SORT(.fini_array.*)))
+    KEEP(*(.fini_array))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+
+    KEEP(*(.jcr*))
+    . = ALIGN(4);
+    /* All data end */
+    __data_end__ = .;
+
+  } > RAM
+
+  /*
+   * Secondary data section, optional
+   *
+   * Remember to add each additional data section
+   * to the .copy.table above to asure proper
+   * initialization during startup.
+   */
+/*
+  __etext2 = ALIGN (4);
+
+  .data2 : AT (__etext2)
+  {
+    . = ALIGN(4);
+    __data2_start__ = .;
+    *(.data2)
+    *(.data2.*)
+    . = ALIGN(4);
+    __data2_end__ = .;
+
+  } > RAM2
+*/
+  .bss :
+  {
+    . = ALIGN(4);
+    __bss_start__ = .;
+    *(.bss)
+    *(.bss.*)
+    *(COMMON)
+    . = ALIGN(4);
+    __bss_end__ = .;
+  } > RAM AT > RAM
+
+  /*
+   * Secondary bss section, optional
+   *
+   * Remember to add each additional bss section
+   * to the .zero.table above to asure proper
+   * initialization during startup.
+   */
+/*
+  .bss2 :
+  {
+    . = ALIGN(4);
+    __bss2_start__ = .;
+    *(.bss2)
+    *(.bss2.*)
+    . = ALIGN(4);
+    __bss2_end__ = .;
+  } > RAM2 AT > RAM2
+*/
+
+  .heap (COPY):
+  {
+    __HeapBase = .;
+    __end__ = .;
+    end = __end__;
+    _end = __end__;
+    KEEP(*(.heap*))
+    __HeapLimit = .;
+  } > RAM
+  /* ARMv8-M stack sealing:
+     to use ARMv8-M stack sealing uncomment '.stackseal' section and KEEP(*(.stackseal*))
+     in .stack_dummy section
+   */
+/*
+  .stackseal (COPY) :
+  {
+    . = ALIGN(8);
+    __StackSeal = .;
+    . = . + 8;
+    . = ALIGN(8);
+  } > RAM
+*/
+
+  /* .stack_dummy section doesn't contains any symbols. It is only
+   * used for linker to calculate size of stack sections, and assign
+   * values to stack symbols later */
+  .stack_dummy (COPY):
+  {
+    KEEP(*(.stack*))
+ /* KEEP(*(.stackseal*))*/
+  } > RAM
+
+  /* Set stack top to end of RAM, and stack limit move down by
+   * size of stack_dummy section */
+  __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+  __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+  PROVIDE(__stack = __StackTop);
+
+  /* Check if data + heap + stack exceeds RAM limit */
+  ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+
+  /* Check if FLASH usage exceeds FLASH size */
+  ASSERT( LENGTH(FLASH) >= (__etext + SIZEOF(.data)), "FLASH memory overflowed !")
+}