66 lines
		
	
	
	
		
			1.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
		
		
			
		
	
	
			66 lines
		
	
	
	
		
			1.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
|  | 
 | ||
|  | 
 | ||
|  | #define LED_Pin LL_GPIO_PIN_4
 | ||
|  | #define LED_GPIO_Port GPIOA
 | ||
|  | 
 | ||
|  | #include "stm32g0xx_ll_rcc.h"
 | ||
|  | #include "stm32g0xx_ll_bus.h"
 | ||
|  | #include "stm32g0xx_ll_crs.h"
 | ||
|  | #include "stm32g0xx_ll_system.h"
 | ||
|  | #include "stm32g0xx_ll_exti.h"
 | ||
|  | #include "stm32g0xx_ll_cortex.h"
 | ||
|  | #include "stm32g0xx_ll_utils.h"
 | ||
|  | #include "stm32g0xx_ll_pwr.h"
 | ||
|  | #include "stm32g0xx_ll_dma.h"
 | ||
|  | #include "my_printf.h"
 | ||
|  | 
 | ||
|  | void SystemClock_Config(void) | ||
|  | { | ||
|  |   LL_FLASH_SetLatency(LL_FLASH_LATENCY_2); | ||
|  |   while(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_2); | ||
|  | 
 | ||
|  |   /* HSI configuration and activation */ | ||
|  |   LL_RCC_HSI_Enable(); | ||
|  |   while(LL_RCC_HSI_IsReady() != 1); | ||
|  | 
 | ||
|  |   /* Main PLL configuration and activation */ | ||
|  |   LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, LL_RCC_PLLM_DIV_1, 8, LL_RCC_PLLR_DIV_2); | ||
|  |   LL_RCC_PLL_Enable(); | ||
|  |   LL_RCC_PLL_EnableDomain_SYS(); | ||
|  |   while(LL_RCC_PLL_IsReady() != 1); | ||
|  | 
 | ||
|  |   /* Set AHB prescaler*/ | ||
|  |   LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1); | ||
|  | 
 | ||
|  |   /* Sysclk activation on the main PLL */ | ||
|  |   LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL); | ||
|  |   while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL); | ||
|  | 
 | ||
|  |   /* Set APB1 prescaler*/ | ||
|  |   LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1); | ||
|  |   LL_Init1msTick(64000000); | ||
|  |   /* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */ | ||
|  |   LL_SetSystemCoreClock(64000000); | ||
|  | } | ||
|  | 
 | ||
|  | 
 | ||
|  | int main(void) | ||
|  | { | ||
|  |   /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ | ||
|  |   LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG); | ||
|  |   LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR); | ||
|  |   /** Disable the internal Pull-Up in Dead Battery pins of UCPD peripheral */ | ||
|  |   //LL_SYSCFG_DisableDBATT(LL_SYSCFG_UCPD1_STROBE | LL_SYSCFG_UCPD2_STROBE);
 | ||
|  |    | ||
|  |   SystemClock_Config(); | ||
|  |   my_printf_config(115200); | ||
|  |    | ||
|  |    | ||
|  |   while(1) | ||
|  |   { | ||
|  |     printf("Hello World\r\n"); | ||
|  |     LL_mDelay(250); | ||
|  |   } | ||
|  | } | ||
|  | 
 |